Mr. Locksmith Basic Rekey Tool Kit | Mr. Locksmith™ Maple Ridge

Mr. Locksmith Basic Rekey Tool Kit: People ask me what do I use for my locksmith tools. So I am going to be showing off my locksmith tools every now and then. When I go to the job site, I just take the little lab kit.

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

Mr. Locksmith Basic Rekey Tool Kit | Mr. Locksmith Maple Ridge

Mr. Locksmith Basic Rekey Tool Kit | Mr. Locksmith Maple Ridge


How To Fix a Sticky Lock | Mr. Locksmith™ Video

How To Fix a Sticky Lock: If you have a sticky lock, whether it’s on your house, your business, a padlock, or your car door, a car ignition is different, if you have a sticky lock, there is a couple of solutions you can do. Mr. Locksmith will help you with sticky locks in the video below.

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

How To Fix A Sticky Lock - Mr. Locksmith Maple Ridge

How To Fix A Sticky Lock – Mr. Locksmith Maple Ridge

 

Kabar Becker BK3 Forced Entry Tool For Law Enforcement? | Mr. Locksmith Maple Ridge

Kabar Becker BK3 Forced Entry Tool For Law Enforcement? | Mr. Locksmith Maple Ridge: The Becker BK3 is a utility knife or a tactical knife.

Kabar Becker BK3 Forced Entry Tool For Law Enforcement | Mr. Locksmith Maple Ridge

The BK3 is a design collaboration between Ethan Becker of BK&T and John Benner of TDI, the Tac Tool smashes, bashes, pries, hammers and cuts. It is equally powerful at lifting stubborn hinge pins, prying open doors or windows, and hammering out glass as it is efficient at cutting 550 cord. A partially serrated edge makes cutting looped and synthetic materials a breeze. MOLLE compatible hard plastic sheath included. Becker Knives “Work for a living”. Made in the USA

The Fixed Blade on the BK3 Becker TacTool by Becker Knife & Tool of KA-BAR® is made from 1095 CRO-VAN Steel and features a Flat grind. 1095 CRO-VAN steel is an easy to sharpen, plain carbon steel used in knife making. Proven to be one of the most popular steels used in KA-BAR Knives

Becker BK3

In this video, I am going to talk about the Becker BK3 or Becker Tac Tool.  It is a utility knife or a tactical knife, whatever you want to call it, we’ll just show you. What does it have to do with locksmithing? Or more importantly, forced entry for police? This does not replace the traditional bars and stuff to bash down doors, get through doors. This is not a covert tool, but it’s a good tool for police to have for if they’re part of a tech tactical team, in my opinion, or if you’re involved with a search, with a search warrant, of course, and you have some minor locks to defeat. So again, we push the covert entry, but this is kind of interesting ’cause just take a look at this. There’s a beast. So this is not an unboxing because I got just the other day I ran across a police unit using one of these and I thought I have to have one and I have to play with it. So I went and bought one. What’s the first thing I do with it? I hack away at a SentrySafe, so we will show that video. So I, a little later, we’ll have a couple of days, but it’s a monster. It’s very, very thick. You know, the handle feels good. This is not a hunting knife. I wouldn’t even call it a camping knife. I’m gonna show three tools that I think are really useful for the average police to have, you know, in the back of your car, in a MOLLE pack. And this is one of three little force tools. So this is the biggest force tool. This does not replace your more traditional police entry tools, which really just copy the firemen. The firemen have fantastic tools for breaching doors. The police have a lot of interesting tools, too. This does not replace the traditional tools. Once you’re inside and you’re running across some interior doors, bedroom doors, bedroom locks, small safes, small drawers, again, it’s a forced entry tool. You can beat on the end if you’ve got a hammer or some stuff. We take a look at it. It’s the Becker BK3. And there are lots of online stores selling it. It’s a great tool. For locksmiths, we’re not gonna show up with this. Sometimes we’re involved in, the police who have already done a forced entry. Then they call us up to open stuff inside. Again, I wouldn’t use it. I can pick the locks.

Locked Out? Call Mr. Locksmith Maple Ridge and we will use our lock picks and not the BK#

 

So for locksmiths and police could use this, too. Sometimes it’s just quicker, faster. Just cut it off. We have a cordless grinder with a cutting wheel. Super fast. The drill, also known as the rotary pick. We use that. So, but that’s traditional locksmithing tools when we have to step it up. We can’t pick it. We don’t have time to pick it. We can bring in these tools. So would a locksmith use this? Not really. But I have it in my kit just for the fun of it. For police? Yes. And combined with the two other locksmith tools which will have follow-up videos. For in the back of your police car, have it there. Smash out a window? Wow, this is like, we’re gonna go to a wrecking yard. We’re gonna knock out a few windows on cars. This thing just hacks right through them. Very quick. And then clean up the glass, of course. So, a force tool. Interesting. It’s got a knife on the edge. It’s got a pretty sharp edge. You can baton on this. It’s so big. It’s got the chiseled front. This could actually slip. It’s a little bit too thick, but it can actually slip some latches. So if you have a key and knob lock, you could slip it with this. Some small padlocks, you could just hack away at it. Like I said, I took this to a SentrySafe and it’s amazing how well it did. The only part that we, that I don’t really like on this, I would call it the seat belt cutter. It didn’t really cut some seat belts too good. It was okay. There’s better tools for cutting seat belts. This was pretty sharp here and it’s got the segregated blade on it. This chops through rope, wood. Even I took some band steel, some small band steel and just cut it. You can see the finish has held up pretty good considering how bad I treated it. Again, I think this is the weak point for a pry bar. I think it will snap there, but I think you really gotta pull at it to snap it. It’s not gonna just snap. But if I had to do with some of my other tools, which I’ll show ya. I mean, if I have to wedge the door a little bit, put in one of my slip tools to slip the latch back, small deadbolts, it’d probably just pop it back. Desk locks, it’ll open it in seconds. It’s an interesting tool. I like it. It was fun when I saw it in action for the first time and I thought I have to have one of these. So I have it. And I’ll show some more videos with it in use. And I’ll show two more little tools I like to put with this, and which makes it a good all round forced entry tool. Again, not really for locksmiths. Law enforcement’s gonna have a fun time with this. Yes, you have better tools, bigger tools, but for just attach this to your MOLLE pack with the couple extra little tools, and you have yourself a nice little entry kit. Stay tuned for more videos on this in use and a couple more little forced entry tools. I hope you enjoyed watching this video. Subscribe to my channel. Also visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

BK3 Becker TacTool

Becker Tac Tool

BK3 Forced Entry Tool For Law Enforcement?

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Maple Ridge Automotive : (604) 259-7617

BK3 Forced Entry Tool For Law Enforcement?

 

Kabar Becker BK3 Forced Entry Tool

Kabar Becker BK3 Forced Entry Tool


How to Remove Lori Double Cylinder Deadbolt | Mr. Locksmith Maple Ridge

How To Remove Lori Double Cylinder Deadbolt | Mr. Locksmith™ Maple Ridge

How to Remove a Lori Double Cylinder Deadbolt: Lori Deadbolt locks can be confusing to remove for experienced and new locksmiths too. You will need a 5/64 -inch long-shaft Allen wrench to remove the Mortice Cylinders from the lock housing. Lori deadbolts, manufactured by Ilco Industries and use mortised deadbolts available in both thumb turn and double cylinder models. Removing the Lori deadbolt to re-key or replace the lock not difficult if you have the proper Allen Wrench.

Mr. Locksmith Maple Ridge: (604) 259-7616

Automotive Locksmith Coquitlam : (604) 259-7617

How to Remove a Lori Double Cylinder Deadbolt

  • Open the door.
  • Remove the deadbolt faceplate from the door edge by removing the two flathead screws using a Phillips screwdriver.
  • Remove the thumb latch assembly from the interior side of the door, if applicable, by removing the two screw bolts on either side of the latch handle, then pulling the assembly horizontally from the door.
  • Insert the long shaft of a 5/64-inch Allen wrench into the space on either side of the slide bolt to engage in the cylinder set screws and turn the set screw counterclockwise two to three full turns to loosen. Repeat for the set screw on the other side of the slide bolt if it is a double cylinder deadbolt.
  • Remove the deadbolt cylinder(s) by turning the cylinders counterclockwise until the cylinder is free of the mortise housing. Insert the deadbolt’s key halfway into the cylinder for leverage in turning the cylinder. Repeat for the opposite side cylinder in double-keyed models
  • Remove the slide bolt assembly from the door edge, then remove the cylinder housing from the door hole.
Lori-Double-Cylinder-Deadbolt-maple-ridge

Lori Double Cylinder Deadbolt | Mr. Locksmith Maple Ridge

Lori-Double-Cylinder-Deadbolt-maple-ridge

Lori Double Cylinder Deadbolt | Mr. Locksmith Maple Ridge

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

 

Mr. Locksmith Maple Ridge: (604) 259-7616

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Is it Cheaper to Rekey or Replace Locks? | Mr. Locksmith™ Maple Ridge

Is it Cheaper to Rekey or Replace Locks? | Mr Locksmith Maple Ridge

https://mrlocksmithmapleridge.com/

Mr. Locksmith Maple Ridge: (604) 259-7616

Cheaper to Rekey or Replace Locks

Whether you just moved into a new home or have been in the same house for a while, it might be a good time for you to look into changing your locks.

Every day I get asked should I rekey my locks or replace them? Re-keying your locks, if you have good locks, it’s pretty inexpensive. We just re-key the lock so the old key doesn’t fit it. So we take the lock off, re-key it, put it in, give you brand new keys. The old key will go in the lock but it won’t turn the lock. That’s re-keying. So re-keying is usually less expensive. So most locks can be re-keyed. Residential, business, commercial, everything. Most locks can be re-keyed. Residential and commercial locks The deadbolts and the key in knobs. We can re-key them. We can change the combination inside and give you new keys. If you have a good lock and it’s less expensive than replacing them. However, if you have some old, crappy locks or inexpensive or you want to increase the security of your locks, then we will replace the lock and sell you a new one and install it.

Rekey Locks

Re-keying is simple. It’s very fast. It doesn’t take long for us to do it. And we can re-key regular locks, high-security locks, some padlocks can be re-keyed but most can’t, they’re sealed units. Re-keying your locks is pretty inexpensive compared to replacing them. Also, it doesn’t take a lot of time, 15 minutes we can re-key a basic lock. Sometimes they take a little bit longer, sometimes quicker. Just depends upon the lock and how old it is and what style of lock it is. Some of the high security locks can take quite a while to re-key. But again, it’s less expensive. You don’t have to change your locks. You don’t have to install brand new ones. We can just re-key your existing locks.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

cheaper-to-rekey-or-replace-lock-maple-ridge

Cheaper to Rekey or Replace Lock?

Mr. Locksmith Maple Ridge: (604) 259-7616

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

cheaper-to-rekey-or-replace-lock-maple-ridge

Cheaper to Rekey or Replace Lock? | Mr. Locksmith Maple Ridge


Mr. Locksmith Richmond For Sale

Mr. Locksmith Richmond For Sale | Call (604) 239-2103

Locksmith Richmond For Sale: Hi, I’m Terry from Mr. LockSmith. I am looking for a Licensee for Mr. LockSmith Richmond, British Columbia. Locksmithing has been absolutely fantastic for me. I raised my family, I’ve had a nice life, I’ve had nice vacations, and it’s all because of locksmithing. Whether we got a good economy, bad economy, we still make money as locksmiths. And unfortunately, even during COVID, we had so many break-ins at night in the city, or everywhere, it was just break-ins like crazy, and mostly commercial break-ins. We still survived COVID, and we still doing well before, during, and after. It hit us a little bit, there’s no denying that, but we recovered pretty quick.

Being a locksmith is great. My grandfather was a locksmith, my father, my uncle. I had some of the best training in the world through family, and I’ve done lots of courses. Even now, I still take courses. A lot of manufacturers have good courses. So what I’ve done is I’ve looked at how we make money, and what’s the best products to sell, what’s the best services to offer. More importantly, the training program teaches you how to become a businessperson.

Mr. Locksmith™ Richmond

Become a Locksmith

How to become a locksmith and make money. For-profit is not a bad word. We want to be successful, we wanna drive nice service vehicles, we wanna have nice tools, we wanna have a nice life, and nice vacations, and raise our family, so we have to become profitable. We don’t treat this as a hobby, it’s a skilled trade. We keep care of the training, but more importantly, the training teaches you how to become a businessman, or a businessperson, because we will have to make money. It is really important that you not only become a good locksmith, but you also become a good businessperson. The training keeps care of that.

Locksmith Marketing

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life. I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a new owner.

Bump-Keys-Castration-Rings

Mr. Locksmith Bump Keys

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life.

I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a franchisee. Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. Locksmith Richmond BC.

Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. LockSmith Richmond.

Call Terry at Mr. Locksmith Richmond Call (604) 239-2103 or email [email protected]

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of Locksmith experience and has a BA (Hons) from Simon Fraser University.

Mr.-Locksmith-Richmond-For-Sale-Call-604-239-2103

Mr. Locksmith Richmond For Sale | Call (604) 239-2103


Weiser PowerBolt 1 Unboxing and Problems | Mr. Locksmith Maple RIdge

Weiser PowerBolt 1 Unboxing and Problems | Mr. Locksmith Maple Ridge

Mr. Locksmith Maple Ridge: (604) 259-7616

Weiser PowerBolt 1 Coquitlam: Weiser Powerbolt 1, electronic lock. What is interesting is the other day I had to open a Weiser PowerBolt 1  because the malfunctioning lock had been installed on a pool room door and was failing to open.

Weiser PowerBolt Features

  • One-touch motorized locking. Lock your door with a single touch. No additional turning/twisting needed.
  • Keyless Entry – No key over-ride.
  • Deadbolt operated by an electronic keypad.
  • Features 4 user access codes, access codes can be between 4 and 8 digits long.
  • 60-second lockout after 3 consecutive incorrect entries.
  • Fits most standard residential door preparations.
  • Low battery alarm starts 6 weeks before they drain
  • A 9 Volt terminal behind the silicone Weiser logo as a backup if the batteries fail.
  • Lifetime mechanical and finish warranty, One-year electronics warranty.
  • Weiser PowerBolt 1 Coquitlam
  • 4 AA, purchased separately.

For more information on Electronic Locks go to Keyless Locks.

 

Weiser PowerBolt 1 Installaton

So the Weiser Powerbolt. And I don’t know if it is a good lock or bad lock, I’ll say that upfront. The reason the customer had problems was, the battery went dead. So the battery was dead on their Weiser bolt. So we got instructions, installation thing, little skinny little keypad, box of stuff. You know, the inside is not so small. Instructions is what’s in this should be the bolt. So, we have the bolt, this is if you wanna convert it to a drive-in latch. And we have a strike plate for the edge of the door, another plate, and our screws. Now this is different than a lot of the newer locks, we call it the D, this is still using the, just the little slot there. So the bolt is using just the slot. So it’s not your typical D, D latch on this one. And it’s adjustable. So it goes from 2 3/8″ to 2 3/4″ backset

You remember, does this say top? It doesn’t have top on it. Remember we call it Mickey mouse ears, the ears go on top. So that’s the top and it’s adjustable 2 3/8″ to 2 3/4″ backset. There is a different bolt than they have in there, in their other locks, more of an old, old style, but it’s still different. Oh, there’s the tailpiece, I said bits and pieces inside plate. Let’s see how it goes on. Okay. It’s got long screws, short screws, different thicks of doors. Takes four AA batteries and no batteries supplied. It didn’t say that on the box, Where are my batteries? Okay. I’ll just grab some batteries.

I got lots of batteries. Remember as locksmiths, always carry lots of fresh batteries. So here are no batteries, no big deal. We will play with that. Let’s throw in some width screws, to there. Remember, don’t crank these in all the way. It’s, we just want them snug. That’s all. That appears to go under. And, the cord from the exterior to the interior goes under the bolt, goes into the lower part and we’re gonna use the slightly longer screws. Okay. So that looks good. That’s not crimped. Here we go. Now, this is the interesting part. It says just fit that in there. Okay. Just fits in. Okay. Where does it go?

We’ve got that into there. So there’s nothing on the exterior of the tailpiece to activate the deadbolt, just slips in. Then we take the power supply or hook up the cable. Let’s get going, see if it fits. One of the big problems you have to have with all these locks is, do not crimp the cables, cause that’s a pain in the butt. So we have machine screws. Remember, use machine screws don’t use wood screws. I always have lots of batteries.

PowerBolt Batteries

The lock requires four (4) double-A batteries. Ooh, it’s happy. So right off the bat, I’ve always found these kinds of hard, if you’re doing the manually, it’s the, you think, I haven’t. The first time I installed the early, early versions of the Powerbolt, I thought I installed it wrong cause it was so hard turning that thumb turn. But that is normal. It’s not like a normal kind of lock. You don’t even feel the deadbolt going out, to the bolt itself, going out all the way. But it is going all the way. So, right off the bat that’s kind of hard, but not too hard.

PowerBolt 1 Instructions

Okay. I had to pull up the instructions. I can see why people hate these things. So from the inside, I have to hit the program. So the programming button is on the inside. So I guess you gotta be inside already to get this. There are different instructions for the left and the right. So this is left. Hit program. Two beeps. Press one-two. Press program again. I will hear one short beep. Now press in a four to eight-digit code. Didn’t like the last one, let’s do this. And then, press the program again. Now we hear one long beep. Okay. Let’s lock it. It locks. It unlocks. Lock it. Okay. Unlock it. Let’s see if it’ll handle another user code.

So we do a program, two beeps. Hit one-two. Press program again on the inside, one short beep. A four to eight-digit code. Let’s see if it’ll do this. One, two, three, four, then I press the program again. One long beep, successful. Okay. Let’s lock it. Then push the button. Okay. Now let’s lock it. The old number. Okay. It holds two numbers. So we can do, let’s just try this one more time and add another number. Press program. Press one-two, because it’s a left-hand lock. Press program again. And I’m gonna try one, two, three, four. Then I got to press program again. Nope. It didn’t like that.

It said three beeps, if you hear three beeps, it was unsuccessful. You know why you probably didn’t like the one-two, because this is left, by their, by there, this is a left. They call it a left walking latch. Well, that’s a bolt visor. It’s called a deadbolt. So it’s a left locking latch as per their instructions. So will, does not like the one two number, but it does like. Like that number. Lock again. And it likes That number. So if it’s a programming number, it doesn’t like that. So the other programming number, if it was the other way around, let’s see if it just locks that one out. Five six is considered a lock code number. So let’s just lock it. So we’re gonna program.

Press one-two, then press program again. Well, It liked that. Let’s try the number. Okay. So, because this is a, if I had to program it from original to a right hand, it won’t take one-two. But if I program it from here, it will take that as a programming code. Let’s just try one more programming code. So let’s just lock it. That’s it. Program. One two. Program. Didn’t like that, three beeps means wrong. The box and the instructions, I just took a quick look at it. I, it, I had to look at how many user codes of this handle. I had to go to the website to look it up and it will hold four user codes. They can be between, four or eight-digit, four to eight digits, whatever. So they don’t tell you that.

So it only holds four user codes. The instructions are poor. But we do know that if I, in theory, let’s try this. If I punch in, three times wrong, I’m locked out for 60 seconds. So if somebody is playing with it, gets locked out. Now I wonder, let’s try a proper code. Now it won’t let me try anything. What if I lock it and unlock it? No. It’s still locking us out for 60 seconds. Some of the locks, if you lock it, unlock it from the inside. So four user codes, 60-second lockout, if you do it three times in a row wrong.

Weiser-PowerBolt-1-Deadbolt-Maple-Ridge

Weiser PowerBolt 1 Deadbolt | Mr. Locksmith Maple Ridge

Weiser PowerBolt 1 FAILS

I am going to remove the batteries and test the battery backup. Now, this is what, the first time we ran across this lock, the customer, the batteries were dead and the lock would not open. And, the interesting thing is you’re supposed to have a nine-volt battery. So let’s disconnect the battery. So, disconnect the battery. What’s kind of interesting is, and quite a few locks have this and some of them work really well.

This is a fresh battery. It’s a Duracell. It’s one we use all the time. Right under the nameplate is, cause there’s no key override so you locked out of this. There we go. Stick my battery on here. Okay. It seems to have a rear proper wedge, a little plus or minus but we can figure this out. Okay? Okay. So it does take, plus goes on that side. This is why I have boxes of smart key locks, smart locks. I got boxes of broken ones, because out of the box. Okay, we’re gonna, this is a fresh nine-volt.

Let’s grab another one. This is out of my alarm kit. So, these are good batteries. So we know we have the plus goes to here. Oh, don’t leave it, leave it running, leave it running. I find this fascinating. My, my camera guy is not liking this, but no no, keep it running. Let’s see. Okay. Just hooked up the battery. Okay. Okay. This is a real test here. So let’s lock it. Let’s disconnect all the, let’s just pretend the batteries are dead, I will disconnect them.

I remove all the batteries the lock is dead. We are locked out. You go there as per the instructions. I take my battery, nothing with that one. This one. Okay. Likes that one. Just in case, here you hold that. press it. It says, wait until it makes a noise when its got the positive on this side. See. It’s crap. And this is why the customers are locked out.

We had, we tried everything. I bought one out of the box. You saw this. I went to the local Big Box Hardware Store. I bought this, hooked it up. Just like our customer had a problem. I could not get it open. I had my nine volts. He was sitting there with his nine volts. We did not, I didn’t wanna, we did not get it open with the battery pack. We did not get it open from the front. And I tried everything. And in the end, what did do? We drilled it off the door. Cause we only got one door going into the pool room. And it didn’t work for me. And I just thought, maybe it was a faulty lock.

It was, it didn’t work. I couldn’t use my batteries. I couldn’t get it to work. And the customer had batteries too. But a lot of times we go to a lockout, the customer’s batteries, we put in our batteries and the customer is using old batteries. And so the lockout, look at this right here in the shop, having fired a round, right out of the box. You saw it, didn’t work. If a Weiser sees this, cause they know I pick on their products a lot. Let’s put, let’s go to Home Depot together, or Rona or wherever you want.

Let’s buy one of these, right out of the store. Okay, we’ll go together and let’s do this. And let’s see if this works. Hey, one more time. Try the other battery. Seems to like that one. How’d you like to be? I am a locksmith. How’d you like to be a homeowner and this is what’s happening to you? And you call me up in the middle of the night, we come out here, sometimes we take our battery or whatever, we open it up.

Weiser PowerBolt Problems

  • Poor Instructions
  • No Batteries Supplied
  • Battery Backup Failed

I don’t feel so bad now. Crappy user instructions, crappy lock. We know it works with the batteries, four user codes, 60-second lockout. This is why I don’t sell this at all. Because of the problems. I ran around, we grabbed a few more nine volts, stole one out of my smoke detector, it still doesn’t work.

In conclusion, I would not recommend this lock and I can see why locksmiths. It must be. I dunno, who knows, but I can’t recommend this, but I can see why it’s, why do locksmiths love these locks, cause we’re going out at night and daytime, and we are opening these. I have a video on my training site on how to totally bypass this, but it does require you to drill the lock and it destroys the lock.

Hopefully, that customer has taken that lock back and got the warranty out of it, cause it doesn’t work. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Weiser PowerBolt 1 Coquitlam

 

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of locksmith experience and a BA (Honors) in Criminology from Simon Fraser University.

Mr. Locksmith Maple Ridge: (604) 259-7616

Weiser-Powerbolt-1-Review-and-Problems-Maple-Ridge

Weiser Powerbolt 1 Review and Problems | Mr. Locksmith Maple Ridge

 

Merry Christmas! Happy New Year! | Mr. Locksmith™ Maple Ridge

Merry Christmas! Happy New Year! | Mr. Locksmith™ Maple Ridge

Merry Christmas and a Happy New Year to my family, friends, and customers.

Lots of Great Videos coming this Year.

Mr. Locksmith Maple Ridge: (604) 259-7616

Subscribe to my channel.

Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Merry-Christmas-Mr-Locksmith-Maple-Ridge

Merry Christmas Mr Locksmith Maple Ridge Elf on the Shelf

 

Merry-Christmas-Mr-Locksmith-Maple-Ridge

Merry Christmas Mr Locksmith Maple Ridge Elf on the Shelf

 

Mr. Locksmith™

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Maple Ridge: (604) 259-7616

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Merry-Christmas-Mr-Locksmith-Maple-Ridge

Merry Christmas Mr Locksmith Maple Ridge

Schlage Sense Smart Deadbolt Review | Mr Locksmith Maple Ridge

Schlage Sense Smart Deadbolt Review | Mr Locksmith Maple Ridge

Mr. Locksmith Maple Ridge: (604) 259-7616

For further information go to Electronic Door Systems

Schlage Sense Smart Deadbolt is one of my favorite deadbolts of Residential Security and Home Automtion. It makes getting in the door as easy as entering an access code on a touchscreen or using your smartphone to unlock the door before you even get out of the car. And that’s only the beginning of what keyless entry can do for you when it comes to both security and convenience.

  • Works with Schlage Sense app for Android smartphones, iPhone, iPad, iPod touch
  • Use with 1-3/8 inch to 1-3/4 inch door
  • Guaranteed to fit on standard pre-drilled doors
  • Easy to set up with smartphone app
  • Holds up to 30 access codes
  • Graded Best in Residential Security, Durability, and Finish

The free Schlage Home app turns your iPhone or Android smartphone into your key. It also puts total control of the lock from anywhere at your fingertips using the optional WiFi Adapter. You can add, delete and email access codes, manage lock settings, set access schedules and monitor usage, right from your phone.

 

Adding the optional Schlage Sense WiFi Adapter. It creates a secure connection between your Schlage Sense Smart Deadbolt and your home network, allowing remote access. While not required, the WiFi adapter is also your connection to a number of compatible home automation systems

Programmable access codes contain 4 digits. No more worrying about managing your keys or even losing them altogether. Pair with your phone over Bluetooth for access in the palm of your hand. And program up to 30 codes to give easy access to your family.

How To Install Schlage Sense Smart Deadbolt

 

Schlage Sense Smart Deadbolt Battery Replacement

 

How To Rekey Schlage Sense Smart Deadbolt

The Schlage Smart Deadbolt with Century Trim in Satin Nickel makes daily life easier and more convenient. Enter an access code on the touchscreen to unlock the door instead of searching your pockets for keys. Pair the lock with your smartphone over Bluetooth.. Share access with trusted friends and family with just a few taps in the Schlage Sense app no more keeping track of spare keys. The Schlage Sense lock is easy to install yourself in minutes. It’s battery operated so there’s no hardwiring required, and the lock will still accept access codes if the power goes out at home. You can update the lock wirelessly through the app as new features are released, which means you never have to buy a new lock to take advantage of the latest capabilities. Add the Schlage Sense Wi-Fi Adapter (sold separately) to your home Wi-Fi network to lock/unlock from anywhere on Android smartphones, iPhone., iPad. or iPod touch.. Or, if you have an iPad./Apple TV. connected to your home Wi-Fi network, you can control the lock from your iPhone as part of your HomeKit-enabled smart home.

 

 

 

 

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of locksmith experience and a BA (Honors) in Criminology from Simon Fraser University.

Schlage-Sense-Deadbolt-Review-Maple-Ridge

Schlage Sense Deadbolt Review Maple Ridge

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of locksmith experience and a BA (Honors) in Criminology from Simon Fraser University.

Mr. Locksmith Maple Ridge: (604) 259-7616

How to Take a Copy of a Key | Mr Locksmith Maple Ridge

How To Take A Copy Of A Key | Mr Locksmith Maple Ridge

Call Mr. Locksmith Maple Ridge: (604) 259-7616

https://mrlocksmithmapleridge.com/

Sending a locksmith the picture of a key can help us identify the key or lock. This may seem like a silly video, but it’s actually very important. I made the “How to Take a Picture of a Key” to help our customers.

  1. Take an in-focus picture of the key.
  2. Take a picture of both sides of the key.
  3. Remove any tape or obstruction covering the head of the key.
  4. If possible a picture of the end of the key.
  5. In-focus pictures of the key.

Key Copy Near Me

A lot of times customers ask Where can I get a “key copy near me’”  “I need my locks rekeyed.” or “Duplicate Key” and then they try to describe it to me. Sometimes they can, sometimes they can’t, sometimes there’s no information that you can see, but I can see. So, a lot of times we ask our customers “Take a picture, take an in-focus picture of the key.” So we ask our customers, email or just text me, a picture of your key. So this is how to take a picture of your key so I can see what you have. You gotta take both sides of the key. So take a picture there, so I can see what the make is, I can look at some of the grooves and then turn the key over and take a picture again, and then I can see from the other side I know it’s a Schlage, and on this I can see it’s a C123. So I can tell you “Yes I have that key.” So whatever key you have, whether it’s a car key, or house key, motorcycle, whatever, in focus, both sides of the key, then you can email it to me or a locksmith and we can tell you if we have that key.

Email: [email protected]

How-to-take-a-picture-of-a-key-C123-Maple-Ridge

How to take a picture of a key C123 Maple Ridge

How-to-take-a-picture-of-a-Schlage-Maple-Ridge

How to take a picture of a Schlage Key Maple Ridge

How-to-a-picture-of-a-Kwikset-Maple-Ridge

How to take a picture of a Kwikset Key Maple Ridge

How-to-take-a-picture-of-a-key-Weiser-Maple-Ridge

How to take a picture of a Weiser Key Maple Ridge

Sometimes we’ve had people on fishing expeditions up north, they’ve taken their keys with them they’re in the middle up north, in the middle of nowhere, the wife is locked out, they have the key, and this one, we can actually see this one has a code, so we now know we can cut that by code and we can get that person in the house really quick and easy.

In conclusion, silly as it sounds “how to take a picture of a key”, in focus, both sides of the key, text or email, then we can tell you what you have. [email protected]

How-to-take-a-picture-of-a-key-Mr-Locksmith

How to take a picture of a key Mr. Locksmith

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.