2000 Hummer H1 Broken Ignition | Mr. Locksmith Maple Ridge

2000 Hummer H1 Broken Ignition: In 1992, AM General began selling a civilian version of the M998 Humvee vehicle to the public under the brand name “Hummer”. The first two Hummer H1s to be sold were purchased by Schwarzenegger.

2000 Hummer H1 Broken Ignition

Mr. Locksmith™ Maple Ridge

https://mrlocksmithmapleridge.com/

#mrlocksmith #locksmith #locksmithtraining

Question: Why does the GM produced H1 Hummer us a Ford 5 Cut Ignition?

H1 Hummer

The civilian model began in part because of the persistence of Arnold Schwarzenegger, who saw an Army convoy while filming Kindergarten Cop in Oregon and began to campaign and lobby for a civilian version to be available on the market. In 1992, AM General began selling a civilian version of the M998 Humvee vehicle to the public under the brand name “Hummer”. The first two Hummer H1s to be sold were purchased by Schwarzenegger.

M998 Humvee

2000 Hummer H1 Broken Ignition. H1 Hummer 5 Cut Ford Ignition Malfunction. The Ford 5 Cut ignition failed and this is usually caused by a small piece of the buzzer jams the pins or get bunched up in the back of the ignition . In most cases it is easy to remove the broken piece, turn the ignition to the accessory position, depress the retainer pin and remove the ignition. However, somebody who did not know what they were doing, cracked the ignition and turned a simply car locksmith job into a bit of a nightmare.

Customer was happy to get back on the road. Note: H1 Hummer manufactured by GM, has a GM Diesel engine but uses a Ford 5 Cut Ignition.

Car Locksmith Service

Your automotive locksmith needs will be taken care of by our qualified locksmiths and equipped service vehicles.  We’re available to help you open your car without causing damage, make new keys or replace a car ignition.

2000 Hummer H1 Broken Ignition | Mr. Locksmith Maple Ridge

2000 Hummer H1 Broken Ignition | Mr. Locksmith Maple Ridge

If you own any of the following brands of car, truck or motorcycle, we can manufacture a new key for you: Acura, Audi, BMW, Buick, Cadillac, Chevrolet (Chevy), Chrysler, Citroen, Daewoo, Daihatsu, Dodge, Fiat, Ford, General Motors (GMC), Honda, Hummer, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Landrover, Lexus, Lincoln, Mazda, Mercedes-Benz, Mercury, Mini, Mitsubishi, Nissan, Oldsmobile, Peugeot, Plymouth, Pontiac, Range Rover, Renault, Saab, Saturn, Scion, Subaru, Suzuki, Toyota, Volkswagen (VW), and Volvo.  We can create keys for many other makes as well! Just give us a call and talk to one of our professional locksmiths. Are you wanting to have a transponder key duplicated?  Our expert locksmiths can help you!  Even high security keys for Mercedes-Benz, BMW, etc. are not a problem in most situations.  Limitations do apply, but contact us and we will let you know if we can help!  Our licensed locksmiths can save you money by repairing flip keys as well!

Contact us today to have an experienced locksmith help you with your automotive locksmith situation!

Mr. Locksmith™ Maple Ridge

email: [email protected]

 

 

H1 Hummer Mr. Locksmith Maple Ridge

H1 Hummer Mr. Locksmith Maple Ridge

M998 Humvee, 2000 Hummer H1, 2000 H1 Hummer, Hummer H1, H1 Hummer, Hummer, Ford 5 Cut Ignition, AM General, AM General Hummer,

JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKShttps://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join

Mr. Locksmith Maple Ridge: (403) 800-9185

Mr. Locksmith Automotive: (604) 259-7617

Locksmith Training: http://mrlocksmithtraining.com/ #mrlocksmith #locksmithtraining #locksmithtools

Mr. Locksmith™ email: [email protected]

Locksmith Courses: http://mrlocksmithtraining.com/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia.

Terry Whin-Yates http://mrlocksmithtraining.com/about-terry-whin-yates/ Thanks for watching!

 

Hands-on Locksmith Training Langley| Mr. Locksmith™

Hands-on Locksmith Training | Mr. Locksmith™

Upcoming Classes in LANGLEY, BRITISH COLUMBIA CANADA

For further info go to Mr. Locksmith Training or email [email protected]

Real hands-on locksmithing class designed to teach engineering or maintenance employees for small or large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners to help you become a locksmith, In-House Institutional Locksmith or start your own locksmith business.

In this Hands-on Locksmith Training Langley you will:

  • Cut and duplicate keys on code key machines and key duplicator machines.
  • Rekey locks
  • Shim
  • Trouble shoot
  • Pick locks
  • Take apart (and put back together) locks (deadbolts and key in knobs).
  • Lock-outs, broken keys and picking locks.
  • Design a mini Master key system and master key their locks.
  • Rekey Deadbolt
  • Rekey Key in Knobs
  • Shiming a lock
  • Locksmith Training
  • Picking a lock
  • Opening a lock with no keys
  • Single pin picking, Feel Method, French Method
  • Raking, Jiggling, Bumping, Scrubbing
  • Can you lock even be picked?
  • High Security Locks
  • Tubular, Ace, etc.
  • Lock has malfunctioned.
  • Reading
  • Buying Picks
  • Making Picks
  • Electronic Picks
  • Pick Guns
  • Methods of Entry
  • Legal Issues
  • Tactics
  • Tools
  • Preparation for Entry
  • Setup your own Lock Practice Boards
  • Automotive Lock Picking
  • Other Lock Bypass Methods
  • DAME (Defense Against Methods of Entry)
  • And lots more!
Locksmith Training

Locksmith Training

The Mr. Locksmith Hands-On Locksmithing Course includes all supplies, lock picks, tools and material needed to take the course with.

This class is only $1,500.00.

Terry Whin-Yates is a 3rd Generation Locksmith with over 30+ years of locksmithing experience and a BA (Hons) in Criminology. I will teach you how to rekey and pick locks like a Professional Locksmith. This is a Hands-On Locksmith Class covering basic to advanced Lock Picking Methods and Techniques. Learning how to pick open locks starts with learning the basic to advanced methods of lock picking. The locksmith student will learn the various methods of picking open a lock. I have been teaching locksmith, military and police for over 30 years how to pick open deadbolts, key-in-knob, padlocks, filing cabinets and “pick resistant” and “pick proof” locks. The lock picking class will cover the basic methods are as “Rake,” “Feel” and “Rake and Feel” lock picking methods to advanced lock picking techniques to open locks with mushroom, spool and spiral pins.

All Lock Picking Students will get access to my five (5) online video on Picking Locks, Using Plug Spinners, etc. and my new book. FREE for all students! As an added bonus you will get a copy of my new book “Penetration Expert:”How to be a Professional Lock Picker” for FREE and access to Five (5) or my Private On-line Lock Picking Videos. Important Note: All students must pass a Criminal Records Check / Security Clearance from your local Police Force.

In addition, if you want to purchase lock picks you must pass a Criminal Records Check / Security Clearance.

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths

Upcoming Classes in LANGLEY, BRITISH COLUMBIA CANADA

See you soon

Hands-on Locksmith Training Langley

“If I’d only known, I would have been a locksmith.” Albert Einstein

Visit my website for On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to https://mrlocksmithtraining.com/

Terry Whin-Yates BA (Hons) Criminology, 3rd Generation Locksmith, 35+ Years Locksmith email: [email protected]

Xhorse Key Tool Plus Car Programmer | Mr. Locksmith Maple Ridge

Xhorse Key Tool Plus Car Programmer: Xhorse Key Tool Plus Car Programmer is a professional all-in-one car Programmer. It has multi-function, Bluetooth and WIFI communication interface that are integrated inside. It is a very easy-to-use and a flexible device.

Xhorse Key Tool Plus

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

This is the XHorse. It’s a key tool plus. We’ll get all into the bits and pieces. I just got it – literally, a couple of hours ago and we’re gonna unbox it. And we’re going to take a peek at it, and hopefully, it’s got some cool features that I really need badly – and then we’ll talk about that too. So, let’s see what we got here. Let’s unbox it, and, let’s see if it’s got the special cables we need.

Okie dokie. What do we got here? Nice case. Here is the XHorse Key Tool Plus. So let’s see what we got here. I’ve never seen one, I’ve been looking at them online, and this may have exactly what I need. So, instructions – most instructions are useless so let’s hope for the best.

Right off the bat, it looks kind of rugged – it looks pretty good. I’ve heard good things but let’s see how it works for us. We got a couple of ports, and everything – looks really, really nice. Apparently, this can reset Toyota proxes and we’ll be putting that to the test. We’re actually going to use this as our go-to-machine. We’ve got quite a bit newer cars, and we were running across problems so let’s see if that’s got that.

What do we have in here? Cable – looks like the recharging cable. OBD 2 cable. Serial. Port connection. Couple of adapters. It looks like they’re very well built. And Xhorse supertransponders.  I’ve been happy with some of their other products – we’ll talk about that later.

Unboxing Xhorse Key Tool Plus Car Programmer | Mr. Locksmith Maple Ridge

Unboxing Xhorse Key Tool Plus Car Programmer | Mr. Locksmith Maple Ridge

Xhorse Key Tool Plus

Unboxing Key Tool Plus Highlights:

  1. Language: English ,French ,Spanish ,Portugues ,Chinese The rest language beside those 5 , only xhorse local dealer can activate related language For example : If you need Russian language, only xhorse russia dealer can activate it to customer.
  2. Update Online free Lifetime
  3. Read Xhorse bonus points for copy 48 96 bit (100 points) and mercedes calcuation (200 points). It can bind with key cutting machine, the Mercedes calcuation can get 1 day a free token everyday.
  4. All-in-one functions. It provides an all-in-one security solution for locksmiths that combines functions of VVDI2, VVDI MB, Key Tool Max and VVDI PROG with the ability to expand the capabilities as needed.
  5. Toyota H Smart Key AKL Without Emulator 6.Global Full Version, Color Orange VVDI PAD is GL Global Version, just different Power Aadapter for EU/UK/US Plug.

For further information go to https://www.xhorsetool.com/

What more do we got here? More cables. I haven’t looked it up but I think this is the real problem I have right now. The newer Fords – if they go into alarm, you have to reset the alarm and nothing we have can do it. So, this is what started the big push. If you looked into my previous videos, I have five or six car key programmers and nothing has this at the moment. Though, I think one of the products may have something but this is what we’re running across – an awful lot of. Newer Fords, the alarm is going off, and you can not program a key without this and the compatible software in here.

What else we got. Box is excellent. This looks like a flasher. This looks like stuff to reprogram. Again, this is just a quick unboxing. We’re gonna put this right into the field starting in the morning. So this is that kind of “late-at-night, got-it, wanted-to-unbox-it, show-it-off.” And, we’re going to play with it. Give me a couple of weeks and we’re going to have some in-depth programming of this. We’ll see what it can or can’t do. And we’re going to use this as our go-to-programmer. And then see how we do. We’re going to use the Chrysler Star – hopefully that’s in here. We have some stars cables anyway, but, we’re running across those Chrysler, Dodge, Ram with the star cable.

So, we’re going to give this a really good test starting in the morning. I’ll have some little updates as we go along. We’ll start seeing what it can or can’t do. So far, impressed. Let’s see what happens!

Mr. Locksmith™ Maple Ridge

If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Maple Ridge can help you. Call Emergency Locksmith Maple Ridge British Columbia.

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

 

Xhorse Key Tool Plus Car Programmer | Mr. Locksmith Maple Ridge

Xhorse Key Tool Plus Car Programmer | Mr. Locksmith Maple Ridge

 

Training and more videos soon.

Knipex Bolt Cutter For Locksmiths | Mr. Locksmith Maple Ridge

Knipex Bolt Cutter: This mini bolt cutter can cut through more than you ever thought possible. It’s ideal for Mr. Locksmith™ Maple Ridge or anyone who appreciates quality tools.

 

Knipex Bolt Cutter

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

Knipex Cobolt Compact Bolt Cutter

An all-around tool for the toughest demands, this Knipex high-leverage CoBolt cutter features a lever action design that applies 20 times more hand force for superior cutting power with less effort when compared to older models. This mini bolt cutter can cut through more than you ever thought possible. It’s ideal for Locksmiths, automotive or construction applications, cutting cotter pins and nails, repeated use in factory assembly lines, cutting wire fencing in agricultural settings, or even everyday tasks such as cutting floral wire or fish hooks.

Forged from chrome vanadium electric steel, these cutters are built to last. This lightweight cutter features precision-matched cutting edges for cutting soft or hard steel.It also features gripping jaws below the joint for gripping and pulling nails and wires.

  • Plastic Coated Handles
  • Cuts Material like Bolts, Nails, Rivets up to 5.2mm
  • Exceptional Cutting Performance with Minimum Effort Due to Lever Action Design
  • Cutting Edges Induction Hardened, Cutting Edge Hardness Approximately 64 HRC
  • Chrome Vanadium Electric Steel, Oil-Hardened and Tempered

Knipex Bolt Cutters For Locksmith | Mr Locksmith Video

#mrlocksmithmapleridge #locksmithtraining #locksmithtools

Knipex Bolt Cutter Review

I have had this Knipex Bolt Cutter Tool for the last couple years. It is expensive. I have had this for about two years now. It is a Knipex. It’s a German made. It is a fantastic tool. I have this in my tool case and I use it everyday. Because of the way this Bolt Cutter has performed as a superb tool, I purchase more Knipex products now and I am extremely happy with them. Cry once or cry twice. Cry once buying it. It lasts forever. What I mostly use my Knipex for, what I use mine for is basically when I get a screw too long, I will just cut it down to size, it’s just one-handed. It’s easy. I went slow on this because, so it’s one-handed. It’s easy to chop your screw down. I can take it right down to the thread. You just have to be careful of when it shoots through. If you get a deadbolt or a deadbolt with the lazy cam and I got a skinnier door and I gotta chop this back a little bit and it’s one that doesn’t have the lines on it already. The Knipex, now you just gotta be careful when you shoot it out. No problem at all. Even the hardened steel tail pieces of the hardened ones, it just slices these right through. The other ones don’t do it. For a small package, the Knipex is a fantastic little bolt cutter. It’s extremely handy for me, especially when I’m doing installations. I use it to cut screws and tail pieces every day now. So, love it. It’s been in my case, look at it. It looks brand new. It’s been in my case for about two years and the jaws are still perfect and I’ve probably cut a few things that were too big for this and the jaws are absolutely perfect. Please subscribe to my video. Please like it. Hope you enjoyed it. I have more videos coming on more locksmith tools that I use every day. I hope you enjoyed watching this video. Subscribe to my channel. Also visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Knipex Bolt Cutters For Locksmith | Mr. Locksmith Maple Ridge

Knipex Bolt Cutters For Locksmith | Mr. Locksmith Maple Ridge

 

This is the second most little tool I’ve ever bought. It’s a Knipex pliers, it was under $50. Look at the size of this, it’s tiny. It’s extremely strong from what I’ve seen. I bought these for my pick case. I’ll have some stuff showing my little tools that I use for broken keys and whatnot. This is just gonna come in handy for grabbing little bits and pieces. It’s overpriced, yeah, I wanted one and I’ll show you how I put it in my, in my pick case.

Knipex Pliers

Here is a comparison, these are new in my kit now in my everyday carry locksmith tools, and here’s the new tool. Apparently there’s one, that’s a five inch one. I don’t have that one yet. So I’m going to probably add that to my collection. This is my Knipex pliers that I have so far, and they’ve been updating my locksmith tools for these, and I’ll show you how this goes in my little pick case. First thing I grab when I go to do a lockout, most times.

The little pair of Knipex pliers are right in my case for every day, every single locksmith job, this is in my kit and that’s my little case for it. So I have a bigger pick case, but this is just first thing I grab, I got a lockout, go to the door. This is my first kit I grab. Hope you enjoyed the video, please subscribe, please hit the like button, and I hope you look forward to, I have some more interesting videos on locksmith tools coming up.

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

 

If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Maple Ridge can help you. Call Emergency Locksmith Maple Ridge British Columbia.

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

Mr. Locksmith™ Maple Ridge

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

 

Knipex Bolt Cutters For Locksmith | Mr. Locksmith Maple Ridge

Knipex Bolt Cutters For Locksmith | Mr. Locksmith Maple Ridge

 

Knipex Bolt Cutter, Knipex Bolt Cutters, Knipex bolt cutter review, knipex mini bolt cutters, best mini bolt cutters, Knipex Bolt Cutter Locksmith, Knipex Bolt Cutter Locksmith Tools, Knipex Cobolt Compact Bolt Cutter, Knipex Compact Bolt Cutter,

Knipex Pliers Replace Adjustable Wrench | Mr. Locksmith™ Maple Ridge

Knipex Pliers Replace Adjustable Wrench: KNIPEX pliers stand for quality made in Germany. Worldwide leading pliers manufacturer for professional users in trade and industry.

Knipex Pliers Replace Adjustable Wrench

Mr. Locksmith New Westminster: (604) 259-7616

Mr. Locksmith Automotive New Westminster(604) 259-7617

 

 

I am now replacing my crescent wrenches and other pliers with the Knipex pliers. Now, I do not use this. I saw it for sale and it wasn’t expensive and I bought it and I just hang it on the shop wall, so I just thought I would show you. So this is what I use. I’ve been using this forever and in my installation kit, in my everyday carry. I saw this. I am very, very happy with my Knipex tools, so I thought I’d replace this crescent wrench in my everyday carry and it’s getting heavy, but I’m trying to make it lighter. So I replaced it with this.

So let’s just take a peek at what we got here. So what bugs the heck out of me on my crescent wrench, it doesn’t matter what you’re doing. It always comes loose. So you’re trying to use it, I put up with this my whole life. Unless you got the exact tool you’re needing, but in your locksmith case, this is what I use and I really just need, I use it mostly for mailbox locks. So I’m happy with my other tools. So this is the Knipex pliers and it’s got the little button here. look at wide that goes. So this crescent wrench is going in the spare kit. This is going in my everyday carry, in my tool case. So that’s the Knipex. Look at that. No matter what angle it does, it’s locked in. It’s not gonna move on me ’til I push the button and move it where I wanna go. So this is gonna be really handy and

Knipex Pliers

Ia going to show you how I use it on a mailbox lock. So this is my mailbox lock. The Mailbox lock kit has all the different tail pieces for it. So let’s just put this tail piece on there for now. Just for the demonstrations. Normally, I usually install it first and then I put this on last. I’m trying to make this good for the camera to see. Go finger tight. Now what I can do hold my lock. Take the key out, really, put that on there. They are down there just snug. You can really over-tighten these, so be careful. Give a little test. Lube that up. So, perfect. So this tool has replaced my crescent wrench. So this Knipex pliers has now replaced my crescent wrench, which for years has driven me nuts, but I didn’t really have anything better. This is way better. I willl be using this every day now and soon I will have some more videos with this in action on job sites.

Hope you enjoyed the video. Please like and please subscribe. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Knipex Piler Review:

 

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

 

Here is a comparison, these are new in my kit now in my everyday carry locksmith tools, and here’s the new tool. Apparently there’s one, that’s a five inch one. I don’t have that one yet. So I’m going to probably add that to my collection. This is my Knipex pliers that I have so far, and they’ve been updating my locksmith tools for these, and I’ll show you how this goes in my little pick case. First thing I grab when I go to do a lockout, most times.

The little pair of Knipex pliers are right in my case for every day, every single locksmith job, this is in my kit and that’s my little case for it. So I have a bigger pick case, but this is just first thing I grab, I got a lockout, go to the door. This is my first kit I grab. Hope you enjoyed the video, please subscribe, please hit the like button, and I hope you look forward to, I have some more interesting videos on locksmith tools coming up.

 

My Lock Picks Mr. Locksmith Maple Ridge

My Lock Picks Mr. Locksmith Maple Ridge

 

Mr. Locksmith™ Maple Ridge

If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Maple Ridge can help you. Call Emergency Locksmith Maple Ridge British Columbia.

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

 

 

Knipex Pliers Replace Adjustable Wrenches Mr. Locksmith Maple Ridge

Knipex Pliers Replace Adjustable Wrenches Mr. Locksmith Maple Ridge

My Lock Picks | Mr. Locksmith™ Maple Ridge

My Lock Picks: Hi, I’m Terry, and I get asked many times, what do I use for picks.

My Lock Picks

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

Lock Pick Case

When I show up at a job site, I pull this out of my locksmith tools and it’s just a little map expedition case, this is a EDC case. And in it, and this is what I do probably 95% of my picking lockouts, is just, I grab this kit, it’s quick and easy.

Knipex Cobra XS 4″ Plier

And just inside is, I’ll show you what I got here. I have my latest little toy. I have my KNIPEX pliers, and these are handy and they’re narrow enough, sometimes I can get a broken key out of there, but this is for picking. I just grab this. I can have this, if I have to turn it.

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

Lock Picks

The main tools I use, every single time. So my favorite pick is a hook pick with a diamond. And some of these are Peterson’s, Rytans, whatever. That’s my favorite pick. This one’s a little bit thicker. This one’s a little bit thinner. And I always grab, I prefer a rigid tension wrench, and I also have a flexible one. You see, I bent it. I bend this whichever way I’m going. So these three things right here I’d say open up 90, 95% of the lockouts I have if I have to pick the lock.

Plug Spinner

This is it, very simple. I either use a rigid, a flexible, and a lot of times the locks will pick the wrong way. Well, I’m not gonna re-pick it. I’m gonna use my plug spinner. I call it a flipper, a plug spinner. I have a whole different types of spinners, but this is the one in my case. I have a bigger pick set that I use if I just not picking it.

WD40

And of course I always have a little can of WD-40 I use for picking locks, not for lubricating locks, for helping me to pick it. My friends all use TriFlow and I like using WD-40. I had a lock the other day, it was funny. It was a lockout and it was a Schlage deadbolt, and they can be difficult to pick. And I was having no luck picking it at all. And then I just gave it a little spray of WD-40 and it picked like in 10 seconds. Lubricant is extremely important for picking locks. I always try to pick a lock without using lubricant, and then if I can’t pick it, then I’ll spray it. Some guys will spray it with the lubricant right off the bat, some locksmiths will just spray it right off the bat. I’ve had extreme luck. Sometimes you go there, the lock is just ready to pick, so by the time I apply tension, put the pick in, and it opens. People ask about the technique.

Sticky Lock Maple Ridge

Sticky Lock Maple Ridge

 

Single Pin Picking

I’ll show you in a couple of videos coming up, but there’s two techniques. There’s the single-pick method, which is the best method, and then there’s raking, which works well. What I do is, I rake the lock, apply tension, I rake the lock a few times and then I’ll single-pin pick it. That seems to work really good for me. Also, don’t be afraid to release tension. I’ll rake it, single-pin pick it, and then I’ll let go. And if I don’t hear click, click, click, it means I haven’t applied proper tension. So one way, instead of just picking away, some people are afraid to release tension, release the tension, then you can see, “Oh, I picked a bunch.” Or if you hear nothing, you don’t hear the pins falling back in, then you know you got bad tension. But back to the point, this is my everyday carry. If I show up a lockout, this is what I have in my kit. Hope you enjoyed the video. Please like and subscribe and stay tuned for more videos coming up. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

My Lock Picks: If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Maple Ridge can help you. Call Emergency Locksmith Maple Ridge British Columbia.

Mr. Locksmith™

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

 

My Lock Picks Mr. Locksmith Maple Ridge

My Lock Picks Mr. Locksmith Maple Ridge

Knipex Pliers for the Locksmith | Mr. Locksmith™ Maple Ridge

Knipex Pliers for the LocksmithKNIPEX pliers stand for quality made in Germany. Worldwide leading pliers manufacturer for professional users in trade and industry.

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

Knipex Cobra XS 4 inch Piler

You hear the expression, especially when it comes to tools, “Cry once when you buy it or cry twice when you have to replace it.” You buy quality tools, you really save yourself a lot of time and money over the long haul. Same thing with key machines. I’ve got key machines that are 35 years old. They work absolutely perfect. They work some better than some of the new ones. That’s another story. But a couple of years ago, I bought the Knipex bolt cutters for cutting screws and tail pieces on locks. And because of that, I’ve now purchased, I’ve gone into the little tiny, probably the most expensive pliers I ever bought, the Knipex a pliers.

Knipex Pliers

This is in my pick kit, my EDC. I’ve replaced my crescent wrench with this little Knipex. With pliers, it’s basically replaced my crescent wrench. I’ll never go back to a crescent wrench. I’m actually now looking at the larger one, I still use a large crescent wrench for when I install with my pit ball, which is another video, when I’m installing latches on steel doors. So I’m gonna get the bigger set and that’ll be the next thing to add And these two tools, I call them channel locks, but they’re actually called water pump locks.

If I got to grab something, these are unbelievable. So this is in my tool case for every day. This is in my backup kit for when I have to do something a little bit more heavy duty. The power of these and the gripping power is unbelievable. I was in the rain the other day and some of my other tools that were getting rusty, my fault, I should have oiled them down. These things still look brand new. I’ve had excellent luck with these.

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

So I’m extremely happy with my Knipex pliers. Very, very happy. I’m gonna add a few more and you’ll be seeing them in future videos as I’m doing jobs. So these are the very best pliers you can buy. If you look at the Mack Trucks, I think even Snap-On, they’re carrying the nitpicks line in there. I don’t know if they’ve rebranded them, but you can buy these at your, they’re a little bit harder to find at your big box hardware stores ’cause they’re trying to flog their in-house brands. The advantage of buying off of a, I call it the big box trucks, is if something breaks, it’s very easy to do a replacement.

I haven’t had to replace the thing yet, but it’s extremely easy with other Snap-On tools I have, especially my circuit pliers. I tend to break them every couple of years. They just give me a new one. I have some screwdrivers and some Snap-On ratchets and whatnot. If I crack them, they replace them instantly. So I love my Snap-On truck guy and I love the Mack tools guy. That’s the two I like. The tools are good and a lot of them are selling these lines. So it’s just to go in and get a replacement.

Mr. Locksmith™ Maple Ridge

This is the second most little tool I’ve ever bought. It’s a Knipex pliers, it was under $50. Look at the size of this, it’s tiny. It’s extremely strong from what I’ve seen. I bought these for my pick case. I’ll have some stuff showing my little tools that I use for broken keys and whatnot. This is just gonna come in handy for grabbing little bits and pieces. It’s overpriced, yeah, I wanted one and I’ll show you how I put it in my, in my pick case.

 

If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Maple Ridge can help you. Call Emergency Locksmith Maple Ridge British Columbia.

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

Knipex Pliers for the Locksmith

Knipex Pliers for the Locksmith

Knipex Cobra XS 4 inch Piler Review Short | Mr. Locksmith™

Knipex Cobra XS 4 inch Piler Review: If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Langley can help you. Call Emergency Locksmith Langley British Columbia.

Mr. Locksmith Langley: (604) 330-9915

Mr. Locksmith Automotive(604) 259-7617

Knipex Cobra XS 4 inch Piler

This is the second most little tool I’ve ever bought. It’s a Knipex pliers, it was under $50. Look at the size of this, it’s tiny. It’s extremely strong from what I’ve seen. I bought these for my pick case. I’ll have some stuff showing my little tools that I use for broken keys and whatnot. This is just gonna come in handy for grabbing little bits and pieces. It’s overpriced, yeah, I wanted one and I’ll show you how I put it in my, in my pick case.

Knipex Pliers

Here is a comparison, these are new in my kit now in my everyday carry locksmith tools, and here’s the new tool. Apparently there’s one, that’s a five inch one. I don’t have that one yet. So I’m going to probably add that to my collection. This is my Knipex pliers that I have so far, and they’ve been updating my locksmith tools for these, and I’ll show you how this goes in my little pick case. First thing I grab when I go to do a lockout, most times.

The little pair of Knipex pliers are right in my case for every day, every single locksmith job, this is in my kit and that’s my little case for it. So I have a bigger pick case, but this is just first thing I grab, I got a lockout, go to the door. This is my first kit I grab. Hope you enjoyed the video, please subscribe, please hit the like button, and I hope you look forward to, I have some more interesting videos on locksmith tools coming up.

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

Mr. Locksmith™

Mr. Locksmith Langley: (604) 330-9915

Mr. Locksmith Automotive(604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training 

Is It Cheaper To Rekey or Replace Locks? | Maple Ridge Mr. Locksmith

Is It Cheaper To Rekey or Replace Locks? Cheaper to Rekey or Replace Locks Whether you just moved into a new home or have been in the same house for a while, it might be a good time for you to look into changing your locks.

Is It Cheaper To Rekey or Replace Locks

Mr. Locksmith Maple Ridge: (604) 259-7616

Car Locksmith Maple Ridge: (604) 259-7617

 

Is It Cheaper To Rekey Or Replace Locks | Maple Ridge Mr. Locksmith

Is It Cheaper To Rekey Or Replace Locks | Maple Ridge Mr. Locksmith

 

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

Don’t be scammed by Scammer Locksmiths. There is no such thing as a $15 or $25 dollar locksmith. Don’t be scammed by unlicensed online scammer locksmiths. Our Mr. Locksmiths Maple Ridge are BC Government licensed, bonded and insured. Need professional locksmith advice? Call Mr. Locksmith Maple Ridge now and book your appointment. We are available 24 hours a day. Our services include lock change services, home unlock services, lock re-key services, master key systems, lock repair. Lost your keys to your mailbox? We can make keys. High-security lock installation and much more. If you have an issue with your locks or keys, don’t wait any longer. And call Mr. Locksmith Maple Ridge or book your appointment online now. Maple Ridge Locksmith.

Mr. Locksmith Maple Ridge is fully bonded, licensed and insured. This might surprise you, but this isn’t guaranteed when dealing with many other online locksmith companies.

Call 24 Hour Emergency Locksmith Maple Ridge BC

Broken into? Locked out? We’re here to help you! Mr. Locksmith Maple Ridge provides 24 hour emergency service anywhere in the San Luis Rey, CA area. As soon as you give us a ring we will immediately put you on our priority list.  You’ll have an experienced locksmith on their way to wherever you are right away.

Locked out of your home?  We are very experienced with the common problem of being locked out of your house.  Give us a call!  We will quickly send someone to your residence to help you out!  In 95% of the cases, your door can be opened without doing any damage.  Our locksmiths are experts at picking locks, which allows us to get you into your home without causing any damage.

In the very unlikely event that we can’t pick your lock, we will use another method like drilling through the lock to open it.  Drilling does damage the lock but fortunately, it doesn’t cause damage to the door.  Our licensed locksmiths will be sure to have all of the necessary tools they need with them when they first arrive, so you can be assured that you will get into your home. One of our expert locksmiths will be on their way if your home has been broken into.  All you need to do is give us a call.  Our 24/7 qualified locksmiths are available for you.

We’re here for you with any situation you may have.  We’re more than happy to confirm the affordability of our expert services by providing you a preliminary quote over the phone!

 

Call Us Right Away for Qualified Locksmithing & Security Solutions in Maple Ridge British Columbia!

Residential Locksmith Maple Ridge

Are you locked out, have a broken lock or need a house rekeyed? Mr. Locksmith Maple Ridge’s experienced locksmiths are here to assist you with any residential locksmith service you require! Our expert team of locksmiths will be able to assist you with the most technologically advanced home security options to match your specific needs.  From cost-effective high security door locks & deadbolts to sophisticated keyways and digital or keyless security systems, our highly trained locksmiths are qualified to help you out. If you have any residential locksmith service needs – contact us right away!

Commercial Locksmith Maple Ridge

Our highly trained locksmiths will be fully equipped to help you navigate the wide variety of security solutions that are available to help secure your business property.  Our professional locksmiths care about how safe your San Luis Rey business is.  From small businesses to large businesses, we are available to help ensure the security of your business assets. Give us a ring to talk about the various commercial security products and services we offer!

We provide all San Luis Rey commercial locksmith and security solutions, including: High Security Locks & Cylinders, Digital Alarm Systems, Wrap Around Plates, Master Keys and Master Key Systems, Shatterproof Window Film, Door Closing Systems, High Grade Panic Hardware with Lock & Passage Sets, Von Duprin Panic Hardware, Access Control Systems and a Full Range of Yale, Sargent and Adams Rite Products.

We are able to complete a security profile on your business.  You can use this in-depth security profile to make changes to improve your company property security.

All of our locksmiths are fully trained and certified and serve Maple Ridge. Our locksmith services include residential, automotive, commercial, and emergency locksmith service.

Here are just a few of the many services we provide:

  • Locks for Commercial and Residential homes
  • Rekeying Locks
  • Locks Replacement
  • Fixing Locks
  • Changing Locks
  • Locksmith Near Me Maple Ridge
  • High-security locks installation and repair
  • Maple Ridge Locksmith Mobile Service
  • Cheap Locksmith Maple Ridge
  • Maple Ridge Locksmith Emergency locksmith services and lockouts
  • Automotive Locksmith Services
  • Access control services
  • Home automation services
  • Abloy High-Security Locks

We provide locksmith services in the whole Maple Ridge area.

Welcome to Maple Ridge’s premier full-service locksmith and Mobile Locksmith. Mr. Locksmith Maple Ridge Security offers a full range of locksmith services including but not limited to emergency, residential, automotive, and commercial locksmith services. We also offer security systems for home and business which includes surveillance cameras, mag locks, access control, and much more.

We offer commercial, residential, and automotive locksmith services. If you have lost the keys to your car and the dealer tells you they are the only ones that can make it that is probably not the case! We have the inventory and experience to make most automotive keys right on the spot for you saving the hassle of having to have your vehicle towed. We even program Smart Proximity keys.

 

 

How to Rekey Weiser Kwikset Smart Key Lock | Mr. Locksmith Maple Ridge

How to Rekey Weiser Kwikset Smart Key Lock: If your Weiser smart key won’t turn in the lock it is usually because the lock has malfunctioned. Also, occasionally the key will not enter the cylinder to unlock the door.

How to Rekey Weiser Kwikset Smart Key Lock

Mr. Locksmith Maple Ridge: (604) 259-7616

Car Locksmith Maple Ridge: (604) 259-7617

Weiser Smart Key / Kwikset Smart Key Lock.

1- Turn the working key 180 degrees,

2- insert the reset tool in the slot next to the keyway until you hear the “click”

3- remove the key,

4- insert new key and unlock and lock. Note: I do not recommend this lock, too easy to open with a simple tool.

If your Weiser smart key won’t turn in the lock it is usually because the lock has malfunctioned. Also, occasionally the key will not enter the cylinder to unlock the door.

Note: I do not recommend this lock, too easy to open with a simple tool.

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

 

How To Rekey Weiser Kwikset Smart Key Lock | Mr. Locksmith Maple Ridge

How To Rekey Weiser Kwikset Smart Key Lock | Mr. Locksmith Maple Ridge