Best Locksmith Tweezers | Mr. Locksmith Maple Ridge

Best Locksmith Tweezers | Mr. Locksmith Maple Ridge

For further info and to purchase the Locksmith Tweezer go to Mr. Locksmith Maple Ridge.

This is the best locksmith tweezer I have ever used and a “must have” for new and experienced locksmiths. The tweezers are made of stainless steel and the tip of the tweezer has been milled and has a grooved tip for fast and easy loading of cylinder pins. Straight and parallel blades provide ease for rekeying locks and top-pin loading,

Pinning Tweezers are a must have for gripping the small bottom pins, top pins, drivers and lock springs.

The Locksmith tweezers are made of stainless steel that will not bend or flex, these slim tweezers can help pinning lock driver pins from inside the lock. If you need to work with locks internal components this is the perfect tool for you or any locksmith or hobbyist.

Mr. Locksmith Tweezers are:
High Quality Brushed Stainless Steel
Length for Easy Handling
Grooved Tip Design for easy grasping of pins
Ribbed Sides prevent fingers slipping
Notch is Milled to a fine edge for Grasping Thin master pins
Locksmith Tools
Locksmith Tweezers for pinning locks
Locksmith Tweezer for rekeying locks

Mr. Locksmith Tweezers

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

 

 

 

LAB DUR X Semi Pro 003 Pin Kit | Mr. Locksmith Maple Ridge

LAB DUR X Semi Pro 003 Pin Kit | Mr. Locksmith Maple Ridge

For more info and to purchase a Lab pin kit go to Mr. Locksmith Maple Ridge

My favorite Lab pin kit for the locksmith service vehicle is the Lab Dur X Semi Pro Pin Kit. This Lab Pin kit is good for the beginner to advanced Locksmith and is great for Institutional locksmiths.

DUR-X Semi-Pro Universal Rekeying Kit .003 will rekey Kwikset, Schlage, Weiser, Yale, Arrow, Sargent, Weslock, Corbin, Russwin and most popular pin tumbler locks.

LDKU3
– .003 Increments
– 124 Pin sizes, 1 Spring size 115L
– Top/Master Pins sizes: .010 – .200
– Bottom sizes: .156 – .360

Description:
– Lightweight and made of super tough polyethylene
– Triple latches with double snap protection
– Center lid carrying handle
– Seal-Tight Lid prevents pins from mixing
– 50 pins per pocket, 100 springs per pocket
– Key slots for mounting to workbench
– Color Passport Pin Chart Pin sizes printed the same color as the Pins
– Dimensions: 22-1/2″ x 8-1/4″ x 3″

to purchase the LAB DUR X Semi Pro 003 Pin Kit click the following link.

My next most favorite Lab Pin Kit for my Tool Case which I take to every job site is the Lab Mini Universal .003. Click on the following link. LAB MINI UNIVERSAL PIN KIT.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

About Terry Whin-Yates

Terry Whin-Yates is the president and CEO of Mr. Locksmith. Terry’s Grandad Frank, Dad (Brian) and Uncle Rob taught him how to be a locksmith and operate a locksmith business and most importantly, pick locks. Terry studied Criminology at Simon Fraser University. Today he lives in Vancouver and his children work in the business. Mr. Locksmith has several locksmith franchisees, all of whom are like extensions of the family business.

Terry Whin-Yates participates in locksmith podcasts, he writes blogs and posts locksmith videos on YouTube. Terry is engaged in the locksmith community and is actively working towards the improvement of the Locksmithing industry on a whole.

We at Mr. Locksmith encourage and endorse the proper regulation locksmiths in BC. We abide by all government licensing. All of our locksmiths are experienced, licensed, bonded and insured. Furthermore, all of our locksmiths are committed to providing the highest quality services. We are committed to producing the highest caliber locksmiths in all facets of the trade, including skill, knowledge, and adherence to ethics and regulation – and we are proud to say that our locksmiths will be the friendliest you will ever have to meet.

Recently, Terry Whin-Yates assisted CTV McLaughlin on Your Side team doing an Undercover investigation into locksmith pricing from unlicensed scammer locksmiths but also “bait and switch” tactics used by unscrupulous locksmiths. CTV “showed the website and rate sheet to master locksmith Terry Whin-Yates … to put the locksmith company to the test by installing a simple and easy to pick the residential lock on a condo door in Surrey.” Terry stated “It should have cost, by their rate sheet, it should have been $50. We charge and we tell people on the phone $95 to $150. That’s the cost to open your door.”

 

 

 

LAB Mini .003 Pin Kit | Mr. Locksmith Maple Ridge

LAB Mini .003 Pin Kit | Mr. Locksmith Maple Ridge

For more info and to purchase a Lab pin kit go to Mr. Locksmith Maple Ridge 

My favorite Lab pin kit for my toolbox is the LAB Mini .003 Pin Kit. This Lab Pin kit is good for the beginner to advanced Locksmith and is great for Institutional locksmiths.

For more info and to purchase a Lab pin kit go to http://mrlocksmithtraining.com/

My favorite Lab pin kit for my toolbox. I have a large Lab Pin Kit in my Locksmith Service Vehicle and I carry the Lab Mini Kit to the job site for small rekeying jobs.

LAB Mini .003 Pin Kit Universal Rekeying Kit .003 will rekey Kwikset, Schlage, Weiser, Yale, Arrow, Sargent, Weslock, Corbin, Russwin and most popular pin tumbler locks.

Mini Universal Rekeying Kit .003 LMK003:
– .003 Increments
– 81 Sizes
– Masters: .024 – .090
– Drivers: .093 – .235
– Bottoms: .156 – .354
– 115L Cylinder Springs
– Pins per pocket (size dependent)
– Tops: 18 – 80 per pocket
– Bottoms: 18 – 35 per pocket

Mr. Locksmith Mini Lab Kit 003+

Description:
– Solid metal construction. The most durable kit you can buy
– Seal-Tight Lid prevents pins from mixing
– Color Passport Pin Chart Pin sizes printed the same color as the Pins
– Dimensions: 8″x6″x11/16″

To purchase the LAB Mini .003 Pin Kit click the following link.

My next most favorite Lab Pin Kit for my Tool Case which I take to every job site is the Lab Mini Universal .003. Click on the following link. LAB MINI UNIVERSAL PIN KIT.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

 

 

LAB Pro Super Wedge Pin Kit .003 | Mr. Locksmith Maple Ridge

LAB Pro Super Wedge Pin Kit .003 | Mr. Locksmith Maple Ridge

For more info and to purchase a Lab pin kit go to Mr. Locksmith Maple Ridge

I use this Lab Pin Kit for my Locksmith Shop and Hands-On Locksmith Training Class so people can refill their pin kits.

Super Wedge Pro Universal Rekeying Kits with drawer
– EPD003
– .003 Increments
– Accommodates 124 Pin sizes, 1 Spring size
– Top/Master Pins sizes: .010 – .200
– Bottom sizes: .156 – .360

Description:
– Large slide out tool drawer
– Special holder in tool drawer to accommodate the LAB Pin Block – – LBP001 (Sold Separately)
– Solid metal construction. The most durable kit you can buy
– Seal-Tight Lid prevents pins from mixing
– Dual-View Pin Tray
– Color Passport Pin Chart®
– Key slots for mounting to workbench
– 72 Pins Per Pocket
– 100 Springs 115L
– Dimensions: 21″ x 7-3/4″ x 4-1/2″ front x 5-3/4″ back

LAB Pro Super Wedge Universal Rekeying Kit .003 will rekey Kwikset, Schlage, Weiser, Yale, Arrow, Sargent, Weslock, Corbin, Russwin and most popular pin tumbler locks.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.