How to Rekey Lock Schlage Deadbolt | Mr. Locksmith Maple Ridge

How to Rekey Lock Schlage Deadbolt: A rekey is when the internal mechanism of the lock is rearranged or recoded to match a new set of keys. This is basic security work and every locksmith should be able to do this quickly and affordably. A rekey means that the old keys, including the missing or stolen keys, no longer operate the lock, and a new set of keys will. This is the most efficient way to secure your home.

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

 

How to Rekey Lock Schlage Deadbolt | Mr. Locksmith Maple Ridge

How to Rekey Lock Schlage Deadbolt | Mr. Locksmith Maple Ridge

Door Reinforcement Schlage Deadbolt Lock Maple Ridge

Door Reinforcement Schlage Deadbolt Lock Maple Ridge: The Mr. Locksmith “Maple Ridge Special” is a Schlage heavy-duty, commercial-grade deadbolt or High-Security Abloy of Schlage Primus Deadbolt. It could be the high-security, pick-resistant lock or the 600 series Schlage.

Reinforce Door Schlage Deadbolt Installation

Go to https://www.mrlocksmithmapleridge.com to learn more. We have so many break-ins in Maple Ridge and we call this the “Maple Ridge Special.” Absolutely love this. My dad was installing similar locks to this 50+ years ago and this install is still very effective against Forced Entry Brute Force attacks and kick-ins. The door reinforcer that goes the front, the edge, and the back of the door makes it hard to kick in and the door twice as strong against Forced Entry. The 18″ Strike plate with the 3-inch screws installed into the stud makes the door harder to kick in. This is a good and solid. Mr. Locksmith Deadbolt Installation with Door reinforcer and strike plate to help prevent Break-ins and robberies. The Schlage HD Deadbolts are an excellent lock for residential and commercial lock installations. The 24-hour mobile locksmith service can also change and rekey your locks to match our deadbolts. All Mr. Locksmith Maple Ridge Special deadbolts come with 5 Free Keys. Maple Ridge emergency lockout services, 24-hour lock repair, re-key, change, 24-hour mobile locksmith services in Maple Ridge, Downtown Vancouver, Burnaby, North Vancouver and West Vancouver. BC Licensed Locksmith B4227, bonded & insured locksmith. Door Reinforcement

Schlage B660P Deadbolt Lock with a Door Security Plate and a Door Framer Heavy Duty Strike Plate with 3″ Screws.

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Maple Ridge Automotive : (604) 259-7617

Door Reinforcement Deadbolt Lock

Contact us today to have an experienced locksmith assist you with your automotive locksmith situation!

You can see in the video how the door reinforcer goes right around the edge of the door, the back of the door. We have the good, Schlage 600 series deadbolt in there. It’s a commercial grade reinforce door with schlage deadbolt installation. Same locks used in hospitals, schools and Universities and it doesn’t look like a monster lock. It fits in well. Some people like the full plate down here. We never install the deadbolts below the handle, hate it. Deadbolts always go here or higher. This was just, we took out the old Weiser deadbolt, or light-duty deadbolt, we put in a heavy-duty deadbolt. And this will make the door harder to kick in and again some, some people sometimes ill put the full plate. This customer just wanted that plate and again the door is way harder to kick in-

The new Schlage Everest lock system has 6 pins. It’s got the side pin, really hard to pick, hard to bump and difficult to pick. Actually, we don’t have a good time picking these.

There is the plate. You have the 3-inch screw and screw all the way into the stud. It’s a well-built house so it’s got the good frame and now that will make the doorway harder to kick in Door Reinforcement Schlage Deadbolt Lock

We have so many break-ins in Maple Ridge Vancouver and the Lower Mainland we call this the “Maple Ridge Special.”  The Mr. Locksmith “Maple Ridge Special” is a Schlage heavy-duty, commercial-grade deadbolt or High-Security Abloy of Schlage Primus Deadbolt. It could be the high-security, pick-resistant lock or the 600 series Schlage. Absolutely love this. My dad was installing similar locks to this 50+ years ago and this install is still very effective against Forced Entry Brute Force attacks and kick-ins. The door reinforcer that goes the front, the edge, and the back of the door makes it hard to kick in and the door twice as strong against Forced Entry. The 18″ Strike plate with the 3-inch screws installed into the stud makes the door harder to kick in. This is a good and solid.

Door Reinforcement

The Schlage C123 or S123 key and cylinder is a 6 pin Schlage and very hard to pick open but not impossible. It is not rated as pick-resistant. The one up, Schlage Primus lock is UL rated as pick resistant, drill resistant, but this a perfect Vancouver Special install. A higher quality lock would be the Abloy Protec 2 Deadbolt. 

Mr. Locksmith Reinforce Door with Schlage Deadbolt Installation and strike plate to help prevent Break-ins and robberies. The Schlage HD Deadbolts are an excellent lock for residential and commercial lock installations. The 24-hour mobile locksmith service can also change and rekey your locks to match our deadbolts. All Mr. Locksmith Maple Ridge Special deadbolts come with 5 Free Keys. Maple Ridge emergency lockout services, 24-hour lock repair, re-key, change, 24-hour mobile locksmith services in Maple Ridge, Downtown Vancouver, Burnaby, North Vancouver and West Vancouver. BC Licensed Locksmith B4227, bonded & insured locksmith

18″ Strike Plate with 3″ screws to secure the plate to the frame and studs to prevent kick-ins.

18″ Strike Plate with 3″ screws to secure the plate to the frame and studs to prevent kick-ins.

Mr-Locksmith-Donjo-18-Strike-Plate

Mr-Locksmith-Donjo-18-Strike-Plate

Mr-Locksmith-Donjo-Plate

Mr-Locksmith-Donjo-Plate

Mr-Locksmith-Donjo-Mag-Plate

Security Door Plate

Call Us Right Away for Professional Locksmithing & Security Services in Maple Ridge British Columbia!

Deadbolt Locks

Deadbolt-Lock-Schlage-B660-maple-ridge-300x169

Deadbolt Lock Schlage B660 Maple Ridge

 

Mr-Locksmith-reinforce-Door-with-Schlage-deadbolt-maple-ridge-300x169

Door Reinforcement with Schlage Deadbolt Lock Maple Ridge

Weiser PowerBolt 1 Unboxing and Problems | Mr. Locksmith Maple RIdge

Weiser PowerBolt 1 Unboxing and Problems | Mr. Locksmith Maple Ridge

Mr. Locksmith Maple Ridge: (604) 259-7616

Weiser PowerBolt 1 Coquitlam: Weiser Powerbolt 1, electronic lock. What is interesting is the other day I had to open a Weiser PowerBolt 1  because the malfunctioning lock had been installed on a pool room door and was failing to open.

Weiser PowerBolt Features

  • One-touch motorized locking. Lock your door with a single touch. No additional turning/twisting needed.
  • Keyless Entry – No key over-ride.
  • Deadbolt operated by an electronic keypad.
  • Features 4 user access codes, access codes can be between 4 and 8 digits long.
  • 60-second lockout after 3 consecutive incorrect entries.
  • Fits most standard residential door preparations.
  • Low battery alarm starts 6 weeks before they drain
  • A 9 Volt terminal behind the silicone Weiser logo as a backup if the batteries fail.
  • Lifetime mechanical and finish warranty, One-year electronics warranty.
  • Weiser PowerBolt 1 Coquitlam
  • 4 AA, purchased separately.

For more information on Electronic Locks go to Keyless Locks.

 

Weiser PowerBolt 1 Installaton

So the Weiser Powerbolt. And I don’t know if it is a good lock or bad lock, I’ll say that upfront. The reason the customer had problems was, the battery went dead. So the battery was dead on their Weiser bolt. So we got instructions, installation thing, little skinny little keypad, box of stuff. You know, the inside is not so small. Instructions is what’s in this should be the bolt. So, we have the bolt, this is if you wanna convert it to a drive-in latch. And we have a strike plate for the edge of the door, another plate, and our screws. Now this is different than a lot of the newer locks, we call it the D, this is still using the, just the little slot there. So the bolt is using just the slot. So it’s not your typical D, D latch on this one. And it’s adjustable. So it goes from 2 3/8″ to 2 3/4″ backset

You remember, does this say top? It doesn’t have top on it. Remember we call it Mickey mouse ears, the ears go on top. So that’s the top and it’s adjustable 2 3/8″ to 2 3/4″ backset. There is a different bolt than they have in there, in their other locks, more of an old, old style, but it’s still different. Oh, there’s the tailpiece, I said bits and pieces inside plate. Let’s see how it goes on. Okay. It’s got long screws, short screws, different thicks of doors. Takes four AA batteries and no batteries supplied. It didn’t say that on the box, Where are my batteries? Okay. I’ll just grab some batteries.

I got lots of batteries. Remember as locksmiths, always carry lots of fresh batteries. So here are no batteries, no big deal. We will play with that. Let’s throw in some width screws, to there. Remember, don’t crank these in all the way. It’s, we just want them snug. That’s all. That appears to go under. And, the cord from the exterior to the interior goes under the bolt, goes into the lower part and we’re gonna use the slightly longer screws. Okay. So that looks good. That’s not crimped. Here we go. Now, this is the interesting part. It says just fit that in there. Okay. Just fits in. Okay. Where does it go?

We’ve got that into there. So there’s nothing on the exterior of the tailpiece to activate the deadbolt, just slips in. Then we take the power supply or hook up the cable. Let’s get going, see if it fits. One of the big problems you have to have with all these locks is, do not crimp the cables, cause that’s a pain in the butt. So we have machine screws. Remember, use machine screws don’t use wood screws. I always have lots of batteries.

PowerBolt Batteries

The lock requires four (4) double-A batteries. Ooh, it’s happy. So right off the bat, I’ve always found these kinds of hard, if you’re doing the manually, it’s the, you think, I haven’t. The first time I installed the early, early versions of the Powerbolt, I thought I installed it wrong cause it was so hard turning that thumb turn. But that is normal. It’s not like a normal kind of lock. You don’t even feel the deadbolt going out, to the bolt itself, going out all the way. But it is going all the way. So, right off the bat that’s kind of hard, but not too hard.

PowerBolt 1 Instructions

Okay. I had to pull up the instructions. I can see why people hate these things. So from the inside, I have to hit the program. So the programming button is on the inside. So I guess you gotta be inside already to get this. There are different instructions for the left and the right. So this is left. Hit program. Two beeps. Press one-two. Press program again. I will hear one short beep. Now press in a four to eight-digit code. Didn’t like the last one, let’s do this. And then, press the program again. Now we hear one long beep. Okay. Let’s lock it. It locks. It unlocks. Lock it. Okay. Unlock it. Let’s see if it’ll handle another user code.

So we do a program, two beeps. Hit one-two. Press program again on the inside, one short beep. A four to eight-digit code. Let’s see if it’ll do this. One, two, three, four, then I press the program again. One long beep, successful. Okay. Let’s lock it. Then push the button. Okay. Now let’s lock it. The old number. Okay. It holds two numbers. So we can do, let’s just try this one more time and add another number. Press program. Press one-two, because it’s a left-hand lock. Press program again. And I’m gonna try one, two, three, four. Then I got to press program again. Nope. It didn’t like that.

It said three beeps, if you hear three beeps, it was unsuccessful. You know why you probably didn’t like the one-two, because this is left, by their, by there, this is a left. They call it a left walking latch. Well, that’s a bolt visor. It’s called a deadbolt. So it’s a left locking latch as per their instructions. So will, does not like the one two number, but it does like. Like that number. Lock again. And it likes That number. So if it’s a programming number, it doesn’t like that. So the other programming number, if it was the other way around, let’s see if it just locks that one out. Five six is considered a lock code number. So let’s just lock it. So we’re gonna program.

Press one-two, then press program again. Well, It liked that. Let’s try the number. Okay. So, because this is a, if I had to program it from original to a right hand, it won’t take one-two. But if I program it from here, it will take that as a programming code. Let’s just try one more programming code. So let’s just lock it. That’s it. Program. One two. Program. Didn’t like that, three beeps means wrong. The box and the instructions, I just took a quick look at it. I, it, I had to look at how many user codes of this handle. I had to go to the website to look it up and it will hold four user codes. They can be between, four or eight-digit, four to eight digits, whatever. So they don’t tell you that.

So it only holds four user codes. The instructions are poor. But we do know that if I, in theory, let’s try this. If I punch in, three times wrong, I’m locked out for 60 seconds. So if somebody is playing with it, gets locked out. Now I wonder, let’s try a proper code. Now it won’t let me try anything. What if I lock it and unlock it? No. It’s still locking us out for 60 seconds. Some of the locks, if you lock it, unlock it from the inside. So four user codes, 60-second lockout, if you do it three times in a row wrong.

Weiser-PowerBolt-1-Deadbolt-Maple-Ridge

Weiser PowerBolt 1 Deadbolt | Mr. Locksmith Maple Ridge

Weiser PowerBolt 1 FAILS

I am going to remove the batteries and test the battery backup. Now, this is what, the first time we ran across this lock, the customer, the batteries were dead and the lock would not open. And, the interesting thing is you’re supposed to have a nine-volt battery. So let’s disconnect the battery. So, disconnect the battery. What’s kind of interesting is, and quite a few locks have this and some of them work really well.

This is a fresh battery. It’s a Duracell. It’s one we use all the time. Right under the nameplate is, cause there’s no key override so you locked out of this. There we go. Stick my battery on here. Okay. It seems to have a rear proper wedge, a little plus or minus but we can figure this out. Okay? Okay. So it does take, plus goes on that side. This is why I have boxes of smart key locks, smart locks. I got boxes of broken ones, because out of the box. Okay, we’re gonna, this is a fresh nine-volt.

Let’s grab another one. This is out of my alarm kit. So, these are good batteries. So we know we have the plus goes to here. Oh, don’t leave it, leave it running, leave it running. I find this fascinating. My, my camera guy is not liking this, but no no, keep it running. Let’s see. Okay. Just hooked up the battery. Okay. Okay. This is a real test here. So let’s lock it. Let’s disconnect all the, let’s just pretend the batteries are dead, I will disconnect them.

I remove all the batteries the lock is dead. We are locked out. You go there as per the instructions. I take my battery, nothing with that one. This one. Okay. Likes that one. Just in case, here you hold that. press it. It says, wait until it makes a noise when its got the positive on this side. See. It’s crap. And this is why the customers are locked out.

We had, we tried everything. I bought one out of the box. You saw this. I went to the local Big Box Hardware Store. I bought this, hooked it up. Just like our customer had a problem. I could not get it open. I had my nine volts. He was sitting there with his nine volts. We did not, I didn’t wanna, we did not get it open with the battery pack. We did not get it open from the front. And I tried everything. And in the end, what did do? We drilled it off the door. Cause we only got one door going into the pool room. And it didn’t work for me. And I just thought, maybe it was a faulty lock.

It was, it didn’t work. I couldn’t use my batteries. I couldn’t get it to work. And the customer had batteries too. But a lot of times we go to a lockout, the customer’s batteries, we put in our batteries and the customer is using old batteries. And so the lockout, look at this right here in the shop, having fired a round, right out of the box. You saw it, didn’t work. If a Weiser sees this, cause they know I pick on their products a lot. Let’s put, let’s go to Home Depot together, or Rona or wherever you want.

Let’s buy one of these, right out of the store. Okay, we’ll go together and let’s do this. And let’s see if this works. Hey, one more time. Try the other battery. Seems to like that one. How’d you like to be? I am a locksmith. How’d you like to be a homeowner and this is what’s happening to you? And you call me up in the middle of the night, we come out here, sometimes we take our battery or whatever, we open it up.

Weiser PowerBolt Problems

  • Poor Instructions
  • No Batteries Supplied
  • Battery Backup Failed

I don’t feel so bad now. Crappy user instructions, crappy lock. We know it works with the batteries, four user codes, 60-second lockout. This is why I don’t sell this at all. Because of the problems. I ran around, we grabbed a few more nine volts, stole one out of my smoke detector, it still doesn’t work.

In conclusion, I would not recommend this lock and I can see why locksmiths. It must be. I dunno, who knows, but I can’t recommend this, but I can see why it’s, why do locksmiths love these locks, cause we’re going out at night and daytime, and we are opening these. I have a video on my training site on how to totally bypass this, but it does require you to drill the lock and it destroys the lock.

Hopefully, that customer has taken that lock back and got the warranty out of it, cause it doesn’t work. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Weiser PowerBolt 1 Coquitlam

 

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of locksmith experience and a BA (Honors) in Criminology from Simon Fraser University.

Mr. Locksmith Maple Ridge: (604) 259-7616

Weiser-Powerbolt-1-Review-and-Problems-Maple-Ridge

Weiser Powerbolt 1 Review and Problems | Mr. Locksmith Maple Ridge

 

Merry Christmas! Happy New Year! | Mr. Locksmith™ Maple Ridge

Merry Christmas! Happy New Year! | Mr. Locksmith™ Maple Ridge

Merry Christmas and a Happy New Year to my family, friends, and customers.

Lots of Great Videos coming this Year.

Mr. Locksmith Maple Ridge: (604) 259-7616

Subscribe to my channel.

Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Merry-Christmas-Mr-Locksmith-Maple-Ridge

Merry Christmas Mr Locksmith Maple Ridge Elf on the Shelf

 

Merry-Christmas-Mr-Locksmith-Maple-Ridge

Merry Christmas Mr Locksmith Maple Ridge Elf on the Shelf

 

Mr. Locksmith™

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Maple Ridge: (604) 259-7616

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Merry-Christmas-Mr-Locksmith-Maple-Ridge

Merry Christmas Mr Locksmith Maple Ridge

Schlage Sense Smart Deadbolt Review | Mr Locksmith Maple Ridge

Schlage Sense Smart Deadbolt Review | Mr Locksmith Maple Ridge

Mr. Locksmith Maple Ridge: (604) 259-7616

For further information go to Electronic Door Systems

Schlage Sense Smart Deadbolt is one of my favorite deadbolts of Residential Security and Home Automtion. It makes getting in the door as easy as entering an access code on a touchscreen or using your smartphone to unlock the door before you even get out of the car. And that’s only the beginning of what keyless entry can do for you when it comes to both security and convenience.

  • Works with Schlage Sense app for Android smartphones, iPhone, iPad, iPod touch
  • Use with 1-3/8 inch to 1-3/4 inch door
  • Guaranteed to fit on standard pre-drilled doors
  • Easy to set up with smartphone app
  • Holds up to 30 access codes
  • Graded Best in Residential Security, Durability, and Finish

The free Schlage Home app turns your iPhone or Android smartphone into your key. It also puts total control of the lock from anywhere at your fingertips using the optional WiFi Adapter. You can add, delete and email access codes, manage lock settings, set access schedules and monitor usage, right from your phone.

 

Adding the optional Schlage Sense WiFi Adapter. It creates a secure connection between your Schlage Sense Smart Deadbolt and your home network, allowing remote access. While not required, the WiFi adapter is also your connection to a number of compatible home automation systems

Programmable access codes contain 4 digits. No more worrying about managing your keys or even losing them altogether. Pair with your phone over Bluetooth for access in the palm of your hand. And program up to 30 codes to give easy access to your family.

How To Install Schlage Sense Smart Deadbolt

 

Schlage Sense Smart Deadbolt Battery Replacement

 

How To Rekey Schlage Sense Smart Deadbolt

The Schlage Smart Deadbolt with Century Trim in Satin Nickel makes daily life easier and more convenient. Enter an access code on the touchscreen to unlock the door instead of searching your pockets for keys. Pair the lock with your smartphone over Bluetooth.. Share access with trusted friends and family with just a few taps in the Schlage Sense app no more keeping track of spare keys. The Schlage Sense lock is easy to install yourself in minutes. It’s battery operated so there’s no hardwiring required, and the lock will still accept access codes if the power goes out at home. You can update the lock wirelessly through the app as new features are released, which means you never have to buy a new lock to take advantage of the latest capabilities. Add the Schlage Sense Wi-Fi Adapter (sold separately) to your home Wi-Fi network to lock/unlock from anywhere on Android smartphones, iPhone., iPad. or iPod touch.. Or, if you have an iPad./Apple TV. connected to your home Wi-Fi network, you can control the lock from your iPhone as part of your HomeKit-enabled smart home.

 

 

 

 

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of locksmith experience and a BA (Honors) in Criminology from Simon Fraser University.

Schlage-Sense-Deadbolt-Review-Maple-Ridge

Schlage Sense Deadbolt Review Maple Ridge

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of locksmith experience and a BA (Honors) in Criminology from Simon Fraser University.

Mr. Locksmith Maple Ridge: (604) 259-7616

How To Fix a Sticky Lock | Mr. Locksmith Maple Ridge

How To Fix a Sticky Lock | Mr. Locksmith Maple Ridge

Mr. Locksmith Maple Ridge (604) 259-7616

Automotive Locksmith Maple Ridge (604) 259-7616

For further information go to https://www.mrlocksmithmapleridge.com/

If you have a sticky lock, whether it’s on your house, your business, a padlock, or your car door, a car ignition is different, if you have a sticky lock, there is a couple of solutions you can do.

Never, never put oil, or linseed oil, or motor oil, or sewing machine oil, or even graphite. Graphite, do not put that into your lock. Now, WD-40 is penetrating oil. It’s fantastic for getting a sticky lock unstuck but is not a lubricant.

My favorite for a lock is Tri-Flow, just love this stuff. Put a little spray, it does not take a lot, just put a little spray into your lock and it will be fantastic. Or now you know Lock Saver, there’s Houdini. I don’t have any Houdini handy, but this is my go-to is Tri-Flow. So again, WD-40 for sticky locks. It will unstick it, but it’s not gonna lubricate it. Tri-Flow will lubricate the lock perfectly.

Do not use graphite, graphite is bad for you. It’s not good for the locks. It’s an old way of lubricating locks, don’t do it. So go to Tri-Flow. If the lubricant does not work, it could because your key is old and worn, especially on cars we find that a lot. So cutting you a brand new key to factory code, the lock usually works perfectly after that. So it could be a worn key.

Your lock could be worn and the lubricant may be a temporary fix, but it is not going to fix the problem. You have an old lock on your door or the padlock’s old, it’s worn out, you need a new lock. And sometimes, especially with the Honda ignitions, the high security, sometimes the ignition needs to be, the parts, replaced, and you would need a new key because those things just seem to wear out.

How to Fix a Sticky lock Maple Ridge

How to Fix a Sticky lock Maple Ridge

The other issue could be that the door is sticking. So it could be the hinges are dropping, or what really happens, with the change of weather, is the latch, or the deadbolt specifically, is not lined up anymore with the hole. So I have a few more videos on how to fix that. But the way to see if it is the problem is the door frame is open the door and does the key work the lock perfectly? So if the door is open and you can turn the lock perfectly and then when you close the door and it does not lock, then the problem is with your door frame. However, if you open the door, try the key, and it’s still jammed, then the problem is your door.

Locked Out because of a Sticky Lock?

In conclusion, do not use WD-40, oil, linseed oil and do not use sewing machine oil. WD-40 is, a penetrating oil, it’s good but it is not going to lubricate your lock. Use a Lubricant that is meant for locks, Tri-Flow is my favorite. Lock Saver and Houdini are good.

If you have any recommendations, put it at the bottom. So this will help you with sticky locks.

Mr. Locksmith™

Mr. Locksmith Maple Ridge (604) 259-7616

Automotive Locksmith Maple Ridge (604) 259-7616

How to Fix a Sticky Lock Maple Ridge

How to Fix a Sticky Lock Maple Ridge

Rekey Old Style Weiser Locks Key in Knobs | Maple Ridge

Rekey Old Style Weiser Locks Key in Knobs | Maple Ridge

Rekey Old Style Weiser Locks | Mr. Locksmith Maple Ridge (604) 259-7616

Lots of these Rekey old style Weiser Locks Key-in-Knobs still in use. Rekeying Locks

Rekey Old Style Weiser Locks Key-in-knobs where extremely popular long, long time ago, it was everywhere in North America. Nowadays we see less and less of them, but it’s still important to know how to rekey it. One of the key parts is identifying it. Basically, it could be a knob like that, different colors, it could be an orbit, circular, just different styles of the rose and how the lock comes out. Now one way of identifying it was, a lot of them have the push and turn lock. So on the inside to lock it, you just push and turn, and then when the key goes in, here, you turn the key, it just turns a little bit. It just pops it out and then the lock is unlocked.

Now one of the big problems of Rekey Old Style Weiser Key in Knobs is when this handle gets old, it just stays in, so the customer’s turning the key, and the key turns but the lock won’t come undone. That’s another issue, on how to get through that, but right now we’re just going to show you how to rekey them. So to rekey the lock is quite simple, there are just two small screws on here. Go ahead and take the knob off. Just loosen it a little bit, loosen the other one. You have to come in on an angle to get it out. I had somebody ask me once, “Do you have a screwdriver that will do this easier?” And I’m going, no, this is the way it is, unfortunately. Again, the brand name is Weiser, they never, we see a lot of Weiser locks now which are actually Kwikset locks, this was never part of Kwikset, so it only says Weiser, Weiser locks. It takes the Weiser key, in a pinch, you shouldn’t do it, but in a pinch you can use a Kwikset key, but that’s not proper. So basically the knob was just lock-in, and what always happens is that little spring in there would just wear out. Now they used to sell a kit, extra springs, but that was back in the day when you did a lot of repairs, and the people would replace the spring. So the lock is very simple. Take it out; now another way of identifying this, how to take it apart, is there are no holes anywhere, to press the retainer in to remove this cylinder, or the knob. In the back here, see how it’s springy? What we have to do to remove this, we have to hold this out, and then, you see when it was locked, the key only turns that far, to unlock the door. When we wanna rekey it, we pull out the rear post, and at basically the five o’clock, 10 to five position, and it just comes out. And you can see here we can take our bible, to put it back together again, we have our bible, we have the little slot there in the knob, so we’ll put it back at 10 to five, that’s the time I call it, hold out the little post again, and you put it in at 10 to five, and basically put it back in. Sometimes it can be sticky, but the biggest problem is just pull that out, turn it, boom. If you don’t have a key, now it gets a little bit more difficult, but again, it’s a Weiser, it’s extremely easy to pick, just pick it to that position, just pick it over, just hold the post out, pick it to the 10 to five position, and sometimes you can push on this a little bit and it will push out the cylinder. Now to rekey it is interesting. Now if you don’t have key, if you have a key you can take it apart, but if you don’t have a key you have to shim it, and again, it’s a Weiser, it’s easy to pick, easy to shim. So we got the cylinder, so to take out the plug, got the little circlip, and I love this, this is Snap-on, it lasts me forever, and if it breaks they give me a new one. Just gently, just open it up just that little bit. Insert your key, turn it slightly, I have an HPC, hollow follower, just fits on there really nice. And it’s five pins. And we have done enough rekeying videos, this one’s lucky, it’s got the, got the code on there, it’s a direct code. We can just pin it up with the lab kit, and then when you put it back in, just make sure you put it on a slight angle and just put the plug back into the cylinder. Take out the key. I am doing this for the camera, but it’s best to put it on your desk flat. I got my little Snap-on tool. Again, don’t go crazy on opening this, and just put it back on. Always test, test, test. Sounds perfect, clips on good. Now I put it in the 10 to five position. Put my bible into the little spot there. And give it a little twist to make sure that the little post has engaged the back of the lock. So again, there are some different methods, this is the simplest, pull out the post, hold it, some people put a pair of pliers on the back, turn it, now this one did come out extremely easy, let me show you a tougher one here. So that one’s really easy. Here’s another one, this is a real old one I got kicking around. Old one with a new insert. How does this one? See, this one’s not coming out so easy. So again, I’ll just push on the post a little bit, there we go. So basically I’m just pushing on that, and it just pushes it out. So this one’s a little bit more awkward and tougher. And it goes in okay. Rekey Old Style Weiser Key in Knobs. Still see them out there, and you could also see different colors and a different knob style, but again, the secret is it’s got the post on the back.

Rekey Old Wesier Key in Knob Locks

Rekey Old Wesier Key in Knob Locks Maple Ridge

Mr. Locksmith Maple Ridge (604) 259-7616

I hope you enjoyed watching this video, please subscribe to my channel.

Mr. Locksmith™ Locksmith Courses: http://mrlocksmithmapleridge

How to Install a Security Plate on Aluminum Storefront Door | Mr. Locksmith™ Maple Ridge

How to Install a Security Plate on Aluminum Storefront Door | Mr. Locksmith™ Maple Ridge

Mr. Locksmith Maple Ridge (604) 259-7616

https://https://mrlocksmithmapleridge.com/

How to Pick Locks: https://mrlocksmithmapleridge.com/locked-out/

During the Pandemic Lockdown, we had so many break-ins on apartment buildings. They’re stealing the mail, they’re after the GST, they’re after the checks, they’re after whatever checks are coming in. We know for the next several months there’s gonna be a lot of people getting checks, so all the mailboxes getting broken into, we’ve secured this door better. It’s with an astragal. It will stop them from prying. They got the cameras have caught the people. Not caught, they videoed them breaking in. They’re just using little pry bars. They’re spreading the door. With the security plate, it stops them from spreading the door. So, it’s called an astragal or a security plate, whatever you want. This is made out of steel, it is a full length, and it slows them down from prying open the door.

Mr. Locksmith Maple Ridge (604) 259-7616

We have had so many break-ins on apartment buildings that are stealing the mail. The criminal are after the GST cheques and trying to steal ID. We know for the next several months, there is going to be a lot of people getting checks, so all the mailboxes are getting broken into. We have secured this door better. It’s with Astragal Security Plate. It will prevent the criminals from prying the gap between the doors. The security camera has caught people on video, not caught, they video them breaking in. They are just using little pry bars they’re spreading the door. With these security plates, it stops them from spreading the door. It is called an Astragal or called a security plate, whatever you want. This is made out of steel. It’s a full length, and it slows them down from prying open the door. This is a typical apartment building and we have a rash, always a rash of break-ins.

To install the Astragal / Security Plate we are going remove all the hardware, and install a full-length Astragal. Remove all the existing hard, door push plates, bars and on some install we remove the lock too. This door has an electronic access control system so we are not reinstalling the door cylinder and in this case they only had a dummy cylinder. I like to install the top of the security plate and let gravity help to line up and mark the holes. I prefer to use sex bolts because it makes a nice flush mount. Do not use pop rivets to secure the plate to the door.

Robson-Street-Vancouver-Mr-Locksmith-Maple-Ridge

Robson Street Vancouver Nike Boarded Against Looters| Mr Locksmith Maple Ridge

Robson-Street-Vancouver-Mr-Locksmith-Maple-Ridge

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters| Mr Locksmith Maple Ridge

Robson-Street-Vancouver-Mr-Locksmith-Maple-Ridge

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith Maple Ridge

Robson-Street-Vancouver-Mr-Locksmith-Maple-Ridge

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith Maple Ridge

Robson-Street-Vancouver-Mr-Locksmith-Maple-Ridge

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith Maple Ridge

Robson-Street-Vancouver-Mr-Locksmith-Maple-Ridge

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith Maple Ridge

Robson-Street-Vancouver-Mr-Locksmith-Maple-Ridge

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith Maple Ridge

Robson-Street-Vancouver-Mr-Locksmith-Maple-Ridge

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith Maple Ridge

————————————————————————————————-

Locksmith Courses: https://mrlocksmithmapleridge.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://mrlocksmithmapleridge.com/locked-out/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

COMING SOON: ONLINE COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

————————-
Business email: [email protected]
Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230
————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/
——————
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

https://mrlocksmithmapleridge.com/about-terry-whin-yates/
—————–
Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.
————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

How-to-Install-a-security-plate-Maple-Ridge

How to Install a security plate Maple Ridge

Prevent-Mailbox-Theft-with-a-Security-Plate-Maple-Ridge

Prevent Mailbox Theft with a Security Plate Maple Ridge

Robson St Vancouver BC Boarded up to Prevent Looting | Mr. Locksmith™

Robson St Vancouver BC Boarded up to Prevent Looting | Mr. Locksmith™

https://mrlocksmithvancouver.com/

The Pandemic has closed down most Retail Stores and Businesses in Vancouver and the World.

The larger Chains quickly boarded their storefronts with Plywood.

Other businesses are starting board up windows to guard against crime after closing as a result of the COVID-19 pandemic.

The Vancouver Police Department says commercial break-ins have increased and patrols have been beefed up in hardest-hit areas.

In a March 26 press release, the VPD said some criminals are trying to take advantage of the situation and it’s “taking significant measures to combat property crime while local and provincial measures are in place to address the spread of COVID-19.”

To increase security, the VPD advises Vancouver businesses to:

Move merchandise away from windows and out of view or remove it from the retail space altogether

Use window shutters to minimize damage and reduce visibility

Upgrade locks

Increase outdoor lighting levels to ensure the space around your business is visible and well-lit

Aside from the VPD increasing patrols in some areas, property crime detectives are also running several investigative projects to target known offenders.

Break-ins quadruple in Vancouver as stores shut for COVID-19 and the crime stats are increasing.

Mr. Locksmith (604)-262-1907

Mr. Locksmith™

Robson Street Vancouver Nike Boarded Against Looters| Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters| Mr Locksmith 

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith 

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Locksmith Courses: http://mrlocksmithtraining.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

COMING SOON: ONLINE COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

————————-
Business email: [email protected]
Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230
————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/
——————
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/
—————–
Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.
————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Robson St Vancouver BC Boarded up to Prevent Looting | Mr. Locksmith

 

How to On-Board Program a Ford Mustang 2014 | Mr. Locksmith™ Maple Ridge

How to On-Board Program a Ford Mustang 2014 | Mr. Locksmith™ Maple Ridge

Automotive Locksmith Courses and How to Pick Locks: http://mrlocksmithtraining.com/

KEY PROGRAMMING – PROGRAM A KEY USING
TWO PROGRAMMED KEYS

This procedure works only if two (2) or more programmed
keys are available.

1- Insert the first programmed PATS key into the
ignition and turn the key from the OFF position to the
RUN position (maintain the key in the RUN position
for approximately 3 seconds).

2- Turn the first key to the OFF position and remove the
key from the ignition.

3- Within 10 seconds of turning the key to the OFF
position, insert a second programmed PATS key into
the ignition and turn the key from the OFF position
to the RUN position (maintain the key in the RUN
position for approximately 3 seconds).

4- Turn the second key to the OFF position and remove
the key from the ignition.

5- Within 10 seconds of turning the key to the OFF
position, insert the new unprogrammed PATS key into
the ignition and turn the key from the OFF position
to the RUN position (maintain the key in the RUN
position for approximately 3 seconds).

6- To program additional key(s) (up to a
total of 8 keys can be programmed), repeat steps 1
– 5 for each additional key.

Step-by-Step Ford Key Fob Programming Instructions:

1- Close the car doors, then open the driver-side door. Press the UNLOCK button on the driver-side door.

2- Next, turn the ignition from OFF to RUN 8 times. …

3- Press any button on the Ford remote to be programmed. …

4- Have a second remote key fob? …

5- Finally, turn the ignition to OFF.

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith Maple Ridge (604) 259-7616

 

How to Program Ford Mustange Key | Mr. Locksmith Maple Ridge