Door Reinforcement Schlage Deadbolt Lock Maple Ridge

Door Reinforcement Schlage Deadbolt Lock Maple Ridge: The Mr. Locksmith “Maple Ridge Special” is a Schlage heavy-duty, commercial-grade deadbolt or High-Security Abloy of Schlage Primus Deadbolt. It could be the high-security, pick-resistant lock or the 600 series Schlage.

Reinforce Door Schlage Deadbolt Installation

Go to https://www.mrlocksmithmapleridge.com to learn more. We have so many break-ins in Maple Ridge and we call this the “Maple Ridge Special.” Absolutely love this. My dad was installing similar locks to this 50+ years ago and this install is still very effective against Forced Entry Brute Force attacks and kick-ins. The door reinforcer that goes the front, the edge, and the back of the door makes it hard to kick in and the door twice as strong against Forced Entry. The 18″ Strike plate with the 3-inch screws installed into the stud makes the door harder to kick in. This is a good and solid. Mr. Locksmith Deadbolt Installation with Door reinforcer and strike plate to help prevent Break-ins and robberies. The Schlage HD Deadbolts are an excellent lock for residential and commercial lock installations. The 24-hour mobile locksmith service can also change and rekey your locks to match our deadbolts. All Mr. Locksmith Maple Ridge Special deadbolts come with 5 Free Keys. Maple Ridge emergency lockout services, 24-hour lock repair, re-key, change, 24-hour mobile locksmith services in Maple Ridge, Downtown Vancouver, Burnaby, North Vancouver and West Vancouver. BC Licensed Locksmith B4227, bonded & insured locksmith. Door Reinforcement

Schlage B660P Deadbolt Lock with a Door Security Plate and a Door Framer Heavy Duty Strike Plate with 3″ Screws.

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Maple Ridge Automotive : (604) 259-7617

Door Reinforcement Deadbolt Lock

Contact us today to have an experienced locksmith assist you with your automotive locksmith situation!

You can see in the video how the door reinforcer goes right around the edge of the door, the back of the door. We have the good, Schlage 600 series deadbolt in there. It’s a commercial grade reinforce door with schlage deadbolt installation. Same locks used in hospitals, schools and Universities and it doesn’t look like a monster lock. It fits in well. Some people like the full plate down here. We never install the deadbolts below the handle, hate it. Deadbolts always go here or higher. This was just, we took out the old Weiser deadbolt, or light-duty deadbolt, we put in a heavy-duty deadbolt. And this will make the door harder to kick in and again some, some people sometimes ill put the full plate. This customer just wanted that plate and again the door is way harder to kick in-

The new Schlage Everest lock system has 6 pins. It’s got the side pin, really hard to pick, hard to bump and difficult to pick. Actually, we don’t have a good time picking these.

There is the plate. You have the 3-inch screw and screw all the way into the stud. It’s a well-built house so it’s got the good frame and now that will make the doorway harder to kick in Door Reinforcement Schlage Deadbolt Lock

We have so many break-ins in Maple Ridge Vancouver and the Lower Mainland we call this the “Maple Ridge Special.”  The Mr. Locksmith “Maple Ridge Special” is a Schlage heavy-duty, commercial-grade deadbolt or High-Security Abloy of Schlage Primus Deadbolt. It could be the high-security, pick-resistant lock or the 600 series Schlage. Absolutely love this. My dad was installing similar locks to this 50+ years ago and this install is still very effective against Forced Entry Brute Force attacks and kick-ins. The door reinforcer that goes the front, the edge, and the back of the door makes it hard to kick in and the door twice as strong against Forced Entry. The 18″ Strike plate with the 3-inch screws installed into the stud makes the door harder to kick in. This is a good and solid.

Door Reinforcement

The Schlage C123 or S123 key and cylinder is a 6 pin Schlage and very hard to pick open but not impossible. It is not rated as pick-resistant. The one up, Schlage Primus lock is UL rated as pick resistant, drill resistant, but this a perfect Vancouver Special install. A higher quality lock would be the Abloy Protec 2 Deadbolt. 

Mr. Locksmith Reinforce Door with Schlage Deadbolt Installation and strike plate to help prevent Break-ins and robberies. The Schlage HD Deadbolts are an excellent lock for residential and commercial lock installations. The 24-hour mobile locksmith service can also change and rekey your locks to match our deadbolts. All Mr. Locksmith Maple Ridge Special deadbolts come with 5 Free Keys. Maple Ridge emergency lockout services, 24-hour lock repair, re-key, change, 24-hour mobile locksmith services in Maple Ridge, Downtown Vancouver, Burnaby, North Vancouver and West Vancouver. BC Licensed Locksmith B4227, bonded & insured locksmith

18″ Strike Plate with 3″ screws to secure the plate to the frame and studs to prevent kick-ins.

18″ Strike Plate with 3″ screws to secure the plate to the frame and studs to prevent kick-ins.

Mr-Locksmith-Donjo-18-Strike-Plate

Mr-Locksmith-Donjo-18-Strike-Plate

Mr-Locksmith-Donjo-Plate

Mr-Locksmith-Donjo-Plate

Mr-Locksmith-Donjo-Mag-Plate

Security Door Plate

Call Us Right Away for Professional Locksmithing & Security Services in Maple Ridge British Columbia!

Deadbolt Locks

Deadbolt-Lock-Schlage-B660-maple-ridge-300x169

Deadbolt Lock Schlage B660 Maple Ridge

 

Mr-Locksmith-reinforce-Door-with-Schlage-deadbolt-maple-ridge-300x169

Door Reinforcement with Schlage Deadbolt Lock Maple Ridge

How to Remove Lori Double Cylinder Deadbolt | Mr. Locksmith Maple Ridge

How To Remove Lori Double Cylinder Deadbolt | Mr. Locksmith™ Maple Ridge

How to Remove a Lori Double Cylinder Deadbolt: Lori Deadbolt locks can be confusing to remove for experienced and new locksmiths too. You will need a 5/64 -inch long-shaft Allen wrench to remove the Mortice Cylinders from the lock housing. Lori deadbolts, manufactured by Ilco Industries and use mortised deadbolts available in both thumb turn and double cylinder models. Removing the Lori deadbolt to re-key or replace the lock not difficult if you have the proper Allen Wrench.

Mr. Locksmith Maple Ridge: (604) 259-7616

Automotive Locksmith Coquitlam : (604) 259-7617

How to Remove a Lori Double Cylinder Deadbolt

  • Open the door.
  • Remove the deadbolt faceplate from the door edge by removing the two flathead screws using a Phillips screwdriver.
  • Remove the thumb latch assembly from the interior side of the door, if applicable, by removing the two screw bolts on either side of the latch handle, then pulling the assembly horizontally from the door.
  • Insert the long shaft of a 5/64-inch Allen wrench into the space on either side of the slide bolt to engage in the cylinder set screws and turn the set screw counterclockwise two to three full turns to loosen. Repeat for the set screw on the other side of the slide bolt if it is a double cylinder deadbolt.
  • Remove the deadbolt cylinder(s) by turning the cylinders counterclockwise until the cylinder is free of the mortise housing. Insert the deadbolt’s key halfway into the cylinder for leverage in turning the cylinder. Repeat for the opposite side cylinder in double-keyed models
  • Remove the slide bolt assembly from the door edge, then remove the cylinder housing from the door hole.
Lori-Double-Cylinder-Deadbolt-maple-ridge

Lori Double Cylinder Deadbolt | Mr. Locksmith Maple Ridge

Lori-Double-Cylinder-Deadbolt-maple-ridge

Lori Double Cylinder Deadbolt | Mr. Locksmith Maple Ridge

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

 

Mr. Locksmith Maple Ridge: (604) 259-7616

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Is it Cheaper to Rekey or Replace Locks? | Mr. Locksmith™ Maple Ridge

Is it Cheaper to Rekey or Replace Locks? | Mr Locksmith Maple Ridge

https://mrlocksmithmapleridge.com/

Mr. Locksmith Maple Ridge: (604) 259-7616

Cheaper to Rekey or Replace Locks

Whether you just moved into a new home or have been in the same house for a while, it might be a good time for you to look into changing your locks.

Every day I get asked should I rekey my locks or replace them? Re-keying your locks, if you have good locks, it’s pretty inexpensive. We just re-key the lock so the old key doesn’t fit it. So we take the lock off, re-key it, put it in, give you brand new keys. The old key will go in the lock but it won’t turn the lock. That’s re-keying. So re-keying is usually less expensive. So most locks can be re-keyed. Residential, business, commercial, everything. Most locks can be re-keyed. Residential and commercial locks The deadbolts and the key in knobs. We can re-key them. We can change the combination inside and give you new keys. If you have a good lock and it’s less expensive than replacing them. However, if you have some old, crappy locks or inexpensive or you want to increase the security of your locks, then we will replace the lock and sell you a new one and install it.

Rekey Locks

Re-keying is simple. It’s very fast. It doesn’t take long for us to do it. And we can re-key regular locks, high-security locks, some padlocks can be re-keyed but most can’t, they’re sealed units. Re-keying your locks is pretty inexpensive compared to replacing them. Also, it doesn’t take a lot of time, 15 minutes we can re-key a basic lock. Sometimes they take a little bit longer, sometimes quicker. Just depends upon the lock and how old it is and what style of lock it is. Some of the high security locks can take quite a while to re-key. But again, it’s less expensive. You don’t have to change your locks. You don’t have to install brand new ones. We can just re-key your existing locks.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

cheaper-to-rekey-or-replace-lock-maple-ridge

Cheaper to Rekey or Replace Lock?

Mr. Locksmith Maple Ridge: (604) 259-7616

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

cheaper-to-rekey-or-replace-lock-maple-ridge

Cheaper to Rekey or Replace Lock? | Mr. Locksmith Maple Ridge

How to Open a Frozen Lock | Mr. Locksmith Maple Ridge

How to Open a Frozen Lock | Mr. Locksmith Maple Ridge

https://www.mrlocksmithmapleridge.com/

Mr. Locksmith Maple Ridge: (604) 259-7616

How to Open a Frozen Lock Maple Ridge: The most common cause of the locks being frozen if people have washed their car so that the whole door’s frozen.

The Polar Vortex is causing below freezing temperatures and winter storms across Canada and the US. Winter storms can bring cold temperatures, power failures and frozen locks.

The easiest, quickest way is you get some windshield lock de-icer or this is windshield and window de-icer. You can make your own. Basically, it is isopropyl alcohol aka rubbing alcohol. Just spray the whole sides of the car door. Spray the lock. Spray the sides. Spray all over. It is not going to hurt the car. Stinky, yes. Be careful it is extremely flammable. Just let it seep into the door cracks, handle and lock. You can change the bottle to it to a stream but get it right in there. Get it on everything, and then you can get the door open. You can make your own lock de-icer, as well as your windshield de-icer. For your lock de-icer just use this rubbing alcohol. This one is 91% isopropyl alcohol. This is great just for raw, lock de-icer. If you want to make some windshield de-icer, it works fantastic. Use two-thirds of the high-quality rubbing alcohol with one-third water. If you’re at home get your hairdryer. Plug it in. There are some 12-volt hair dryers. At home just plug it into an extension cord. Get the hairdryer going. You’re going to blow hot air all down the sides. This is another handy method. If you don’t have the lock de-icer, the windshield de-icer, get a hairdryer. Put an extension cord on it. Just sit there and just heat up the whole door, all the edges, all everything, as well as the lock. This works pretty well. Takes some time, but it works great. So I hope this has been of help to unfreeze your frozen car door or frozen lock you are locked out.

Frozen Do0r Locks? Call Mr. Locksmith Automotive

Frozen Hockey Puck Lock

Hockey Pucks locks are great for protecting your service truck or locksmith vehicle from Break and Enter attempts. However, in the winter the Hockey Pucks locks on your Locksmith Van or service truck ice up and the locks become frozen while driving in the snow or slush. Prevention is the number one so use WD-40 and spray the heck out of it. WD-40 is a penetrating oil, but it is also water displacement fluid. If your Hockey Puck lock t is iced up give it a few hits first with a rubber hammer then take your lock deicer. Eighty percent or more isopropyl alcohol is the best. Take the lock deicer, get it right in the keyhole, spread it all over it, and that should work where our key will now be able to go in and open it up. Prevention’s the best bet. Give the lock and keyway lots of WD-40, and it works really well to prevent the lock from frezzing. On my own Mr. Locksmith service truck I don’t mind using a butane lighter blowtorch. Just give the blowtorch a little twist, push and click and you get a nice hot flame. Just heat the hockey puck lock right up. Again, I wouldn’t do this on a customer’s. This is my own locksmith service truck. This will get the all unfrozen. And be careful, the lock can get really, really hot. The other way is to get a lighter, match, etc. to heat the lock or keyway. I have this little propane torch. Just heat your key up it doesn’t take long. Heat it up, and then you can start putting it into the lock. Another method to unfreeze the lock if you have nothing just heat the key with your hand, hold it in your hand, get it all heated up. It takes a long time, but if you have nothing, just use your hand. So again, if you have absolutely nothing, heat it with your hand. Just hold it in your hand, heat it up.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

How-to-Open-Frozen-Lock-mr-locksmith-maple-ridge

How to Open Frozen Lock | Mr. Locksmith Maple Ridge

How-to-Open-Frozen-Lock-mr-locksmith-maple-ridge

How to Open Frozen Lock | Maple Ridge

Mr. Locksmith Maple Ridge: (604) 259-7616

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Frozen-Hockey-Puck-Lock-mr-locksmith-maple-ridge

Frozen Hockey Puck Lock | Mr. Locksmith Maple Ridge

HOW TO OPEN FROZEN LOCK MAPLE RIDGE

How to Open Frozen Lock Maple Ridge

Mr. Locksmith Richmond For Sale

Mr. Locksmith Richmond For Sale | Call (604) 239-2103

Locksmith Richmond For Sale: Hi, I’m Terry from Mr. LockSmith. I am looking for a Licensee for Mr. LockSmith Richmond, British Columbia. Locksmithing has been absolutely fantastic for me. I raised my family, I’ve had a nice life, I’ve had nice vacations, and it’s all because of locksmithing. Whether we got a good economy, bad economy, we still make money as locksmiths. And unfortunately, even during COVID, we had so many break-ins at night in the city, or everywhere, it was just break-ins like crazy, and mostly commercial break-ins. We still survived COVID, and we still doing well before, during, and after. It hit us a little bit, there’s no denying that, but we recovered pretty quick.

Being a locksmith is great. My grandfather was a locksmith, my father, my uncle. I had some of the best training in the world through family, and I’ve done lots of courses. Even now, I still take courses. A lot of manufacturers have good courses. So what I’ve done is I’ve looked at how we make money, and what’s the best products to sell, what’s the best services to offer. More importantly, the training program teaches you how to become a businessperson.

Mr. Locksmith™ Richmond

Become a Locksmith

How to become a locksmith and make money. For-profit is not a bad word. We want to be successful, we wanna drive nice service vehicles, we wanna have nice tools, we wanna have a nice life, and nice vacations, and raise our family, so we have to become profitable. We don’t treat this as a hobby, it’s a skilled trade. We keep care of the training, but more importantly, the training teaches you how to become a businessman, or a businessperson, because we will have to make money. It is really important that you not only become a good locksmith, but you also become a good businessperson. The training keeps care of that.

Locksmith Marketing

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life. I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a new owner.

Bump-Keys-Castration-Rings

Mr. Locksmith Bump Keys

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life.

I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a franchisee. Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. Locksmith Richmond BC.

Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. LockSmith Richmond.

Call Terry at Mr. Locksmith Richmond Call (604) 239-2103 or email [email protected]

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of Locksmith experience and has a BA (Hons) from Simon Fraser University.

Mr.-Locksmith-Richmond-For-Sale-Call-604-239-2103

Mr. Locksmith Richmond For Sale | Call (604) 239-2103

Weiser PowerBolt 1 Unboxing and Problems | Mr. Locksmith Maple RIdge

Weiser PowerBolt 1 Unboxing and Problems | Mr. Locksmith Maple Ridge

Mr. Locksmith Maple Ridge: (604) 259-7616

Weiser PowerBolt 1 Coquitlam: Weiser Powerbolt 1, electronic lock. What is interesting is the other day I had to open a Weiser PowerBolt 1  because the malfunctioning lock had been installed on a pool room door and was failing to open.

Weiser PowerBolt Features

  • One-touch motorized locking. Lock your door with a single touch. No additional turning/twisting needed.
  • Keyless Entry – No key over-ride.
  • Deadbolt operated by an electronic keypad.
  • Features 4 user access codes, access codes can be between 4 and 8 digits long.
  • 60-second lockout after 3 consecutive incorrect entries.
  • Fits most standard residential door preparations.
  • Low battery alarm starts 6 weeks before they drain
  • A 9 Volt terminal behind the silicone Weiser logo as a backup if the batteries fail.
  • Lifetime mechanical and finish warranty, One-year electronics warranty.
  • Weiser PowerBolt 1 Coquitlam
  • 4 AA, purchased separately.

For more information on Electronic Locks go to Keyless Locks.

 

Weiser PowerBolt 1 Installaton

So the Weiser Powerbolt. And I don’t know if it is a good lock or bad lock, I’ll say that upfront. The reason the customer had problems was, the battery went dead. So the battery was dead on their Weiser bolt. So we got instructions, installation thing, little skinny little keypad, box of stuff. You know, the inside is not so small. Instructions is what’s in this should be the bolt. So, we have the bolt, this is if you wanna convert it to a drive-in latch. And we have a strike plate for the edge of the door, another plate, and our screws. Now this is different than a lot of the newer locks, we call it the D, this is still using the, just the little slot there. So the bolt is using just the slot. So it’s not your typical D, D latch on this one. And it’s adjustable. So it goes from 2 3/8″ to 2 3/4″ backset

You remember, does this say top? It doesn’t have top on it. Remember we call it Mickey mouse ears, the ears go on top. So that’s the top and it’s adjustable 2 3/8″ to 2 3/4″ backset. There is a different bolt than they have in there, in their other locks, more of an old, old style, but it’s still different. Oh, there’s the tailpiece, I said bits and pieces inside plate. Let’s see how it goes on. Okay. It’s got long screws, short screws, different thicks of doors. Takes four AA batteries and no batteries supplied. It didn’t say that on the box, Where are my batteries? Okay. I’ll just grab some batteries.

I got lots of batteries. Remember as locksmiths, always carry lots of fresh batteries. So here are no batteries, no big deal. We will play with that. Let’s throw in some width screws, to there. Remember, don’t crank these in all the way. It’s, we just want them snug. That’s all. That appears to go under. And, the cord from the exterior to the interior goes under the bolt, goes into the lower part and we’re gonna use the slightly longer screws. Okay. So that looks good. That’s not crimped. Here we go. Now, this is the interesting part. It says just fit that in there. Okay. Just fits in. Okay. Where does it go?

We’ve got that into there. So there’s nothing on the exterior of the tailpiece to activate the deadbolt, just slips in. Then we take the power supply or hook up the cable. Let’s get going, see if it fits. One of the big problems you have to have with all these locks is, do not crimp the cables, cause that’s a pain in the butt. So we have machine screws. Remember, use machine screws don’t use wood screws. I always have lots of batteries.

PowerBolt Batteries

The lock requires four (4) double-A batteries. Ooh, it’s happy. So right off the bat, I’ve always found these kinds of hard, if you’re doing the manually, it’s the, you think, I haven’t. The first time I installed the early, early versions of the Powerbolt, I thought I installed it wrong cause it was so hard turning that thumb turn. But that is normal. It’s not like a normal kind of lock. You don’t even feel the deadbolt going out, to the bolt itself, going out all the way. But it is going all the way. So, right off the bat that’s kind of hard, but not too hard.

PowerBolt 1 Instructions

Okay. I had to pull up the instructions. I can see why people hate these things. So from the inside, I have to hit the program. So the programming button is on the inside. So I guess you gotta be inside already to get this. There are different instructions for the left and the right. So this is left. Hit program. Two beeps. Press one-two. Press program again. I will hear one short beep. Now press in a four to eight-digit code. Didn’t like the last one, let’s do this. And then, press the program again. Now we hear one long beep. Okay. Let’s lock it. It locks. It unlocks. Lock it. Okay. Unlock it. Let’s see if it’ll handle another user code.

So we do a program, two beeps. Hit one-two. Press program again on the inside, one short beep. A four to eight-digit code. Let’s see if it’ll do this. One, two, three, four, then I press the program again. One long beep, successful. Okay. Let’s lock it. Then push the button. Okay. Now let’s lock it. The old number. Okay. It holds two numbers. So we can do, let’s just try this one more time and add another number. Press program. Press one-two, because it’s a left-hand lock. Press program again. And I’m gonna try one, two, three, four. Then I got to press program again. Nope. It didn’t like that.

It said three beeps, if you hear three beeps, it was unsuccessful. You know why you probably didn’t like the one-two, because this is left, by their, by there, this is a left. They call it a left walking latch. Well, that’s a bolt visor. It’s called a deadbolt. So it’s a left locking latch as per their instructions. So will, does not like the one two number, but it does like. Like that number. Lock again. And it likes That number. So if it’s a programming number, it doesn’t like that. So the other programming number, if it was the other way around, let’s see if it just locks that one out. Five six is considered a lock code number. So let’s just lock it. So we’re gonna program.

Press one-two, then press program again. Well, It liked that. Let’s try the number. Okay. So, because this is a, if I had to program it from original to a right hand, it won’t take one-two. But if I program it from here, it will take that as a programming code. Let’s just try one more programming code. So let’s just lock it. That’s it. Program. One two. Program. Didn’t like that, three beeps means wrong. The box and the instructions, I just took a quick look at it. I, it, I had to look at how many user codes of this handle. I had to go to the website to look it up and it will hold four user codes. They can be between, four or eight-digit, four to eight digits, whatever. So they don’t tell you that.

So it only holds four user codes. The instructions are poor. But we do know that if I, in theory, let’s try this. If I punch in, three times wrong, I’m locked out for 60 seconds. So if somebody is playing with it, gets locked out. Now I wonder, let’s try a proper code. Now it won’t let me try anything. What if I lock it and unlock it? No. It’s still locking us out for 60 seconds. Some of the locks, if you lock it, unlock it from the inside. So four user codes, 60-second lockout, if you do it three times in a row wrong.

Weiser-PowerBolt-1-Deadbolt-Maple-Ridge

Weiser PowerBolt 1 Deadbolt | Mr. Locksmith Maple Ridge

Weiser PowerBolt 1 FAILS

I am going to remove the batteries and test the battery backup. Now, this is what, the first time we ran across this lock, the customer, the batteries were dead and the lock would not open. And, the interesting thing is you’re supposed to have a nine-volt battery. So let’s disconnect the battery. So, disconnect the battery. What’s kind of interesting is, and quite a few locks have this and some of them work really well.

This is a fresh battery. It’s a Duracell. It’s one we use all the time. Right under the nameplate is, cause there’s no key override so you locked out of this. There we go. Stick my battery on here. Okay. It seems to have a rear proper wedge, a little plus or minus but we can figure this out. Okay? Okay. So it does take, plus goes on that side. This is why I have boxes of smart key locks, smart locks. I got boxes of broken ones, because out of the box. Okay, we’re gonna, this is a fresh nine-volt.

Let’s grab another one. This is out of my alarm kit. So, these are good batteries. So we know we have the plus goes to here. Oh, don’t leave it, leave it running, leave it running. I find this fascinating. My, my camera guy is not liking this, but no no, keep it running. Let’s see. Okay. Just hooked up the battery. Okay. Okay. This is a real test here. So let’s lock it. Let’s disconnect all the, let’s just pretend the batteries are dead, I will disconnect them.

I remove all the batteries the lock is dead. We are locked out. You go there as per the instructions. I take my battery, nothing with that one. This one. Okay. Likes that one. Just in case, here you hold that. press it. It says, wait until it makes a noise when its got the positive on this side. See. It’s crap. And this is why the customers are locked out.

We had, we tried everything. I bought one out of the box. You saw this. I went to the local Big Box Hardware Store. I bought this, hooked it up. Just like our customer had a problem. I could not get it open. I had my nine volts. He was sitting there with his nine volts. We did not, I didn’t wanna, we did not get it open with the battery pack. We did not get it open from the front. And I tried everything. And in the end, what did do? We drilled it off the door. Cause we only got one door going into the pool room. And it didn’t work for me. And I just thought, maybe it was a faulty lock.

It was, it didn’t work. I couldn’t use my batteries. I couldn’t get it to work. And the customer had batteries too. But a lot of times we go to a lockout, the customer’s batteries, we put in our batteries and the customer is using old batteries. And so the lockout, look at this right here in the shop, having fired a round, right out of the box. You saw it, didn’t work. If a Weiser sees this, cause they know I pick on their products a lot. Let’s put, let’s go to Home Depot together, or Rona or wherever you want.

Let’s buy one of these, right out of the store. Okay, we’ll go together and let’s do this. And let’s see if this works. Hey, one more time. Try the other battery. Seems to like that one. How’d you like to be? I am a locksmith. How’d you like to be a homeowner and this is what’s happening to you? And you call me up in the middle of the night, we come out here, sometimes we take our battery or whatever, we open it up.

Weiser PowerBolt Problems

  • Poor Instructions
  • No Batteries Supplied
  • Battery Backup Failed

I don’t feel so bad now. Crappy user instructions, crappy lock. We know it works with the batteries, four user codes, 60-second lockout. This is why I don’t sell this at all. Because of the problems. I ran around, we grabbed a few more nine volts, stole one out of my smoke detector, it still doesn’t work.

In conclusion, I would not recommend this lock and I can see why locksmiths. It must be. I dunno, who knows, but I can’t recommend this, but I can see why it’s, why do locksmiths love these locks, cause we’re going out at night and daytime, and we are opening these. I have a video on my training site on how to totally bypass this, but it does require you to drill the lock and it destroys the lock.

Hopefully, that customer has taken that lock back and got the warranty out of it, cause it doesn’t work. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Weiser PowerBolt 1 Coquitlam

 

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of locksmith experience and a BA (Honors) in Criminology from Simon Fraser University.

Mr. Locksmith Maple Ridge: (604) 259-7616

Weiser-Powerbolt-1-Review-and-Problems-Maple-Ridge

Weiser Powerbolt 1 Review and Problems | Mr. Locksmith Maple Ridge

 

Merry Christmas! Happy New Year! | Mr. Locksmith™ Maple Ridge

Merry Christmas! Happy New Year! | Mr. Locksmith™ Maple Ridge

Merry Christmas and a Happy New Year to my family, friends, and customers.

Lots of Great Videos coming this Year.

Mr. Locksmith Maple Ridge: (604) 259-7616

Subscribe to my channel.

Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Merry-Christmas-Mr-Locksmith-Maple-Ridge

Merry Christmas Mr Locksmith Maple Ridge Elf on the Shelf

 

Merry-Christmas-Mr-Locksmith-Maple-Ridge

Merry Christmas Mr Locksmith Maple Ridge Elf on the Shelf

 

Mr. Locksmith™

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Maple Ridge: (604) 259-7616

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Merry-Christmas-Mr-Locksmith-Maple-Ridge

Merry Christmas Mr Locksmith Maple Ridge

Schlage Sense Smart Deadbolt Review | Mr Locksmith Maple Ridge

Schlage Sense Smart Deadbolt Review | Mr Locksmith Maple Ridge

Mr. Locksmith Maple Ridge: (604) 259-7616

For further information go to Electronic Door Systems

Schlage Sense Smart Deadbolt is one of my favorite deadbolts of Residential Security and Home Automtion. It makes getting in the door as easy as entering an access code on a touchscreen or using your smartphone to unlock the door before you even get out of the car. And that’s only the beginning of what keyless entry can do for you when it comes to both security and convenience.

  • Works with Schlage Sense app for Android smartphones, iPhone, iPad, iPod touch
  • Use with 1-3/8 inch to 1-3/4 inch door
  • Guaranteed to fit on standard pre-drilled doors
  • Easy to set up with smartphone app
  • Holds up to 30 access codes
  • Graded Best in Residential Security, Durability, and Finish

The free Schlage Home app turns your iPhone or Android smartphone into your key. It also puts total control of the lock from anywhere at your fingertips using the optional WiFi Adapter. You can add, delete and email access codes, manage lock settings, set access schedules and monitor usage, right from your phone.

 

Adding the optional Schlage Sense WiFi Adapter. It creates a secure connection between your Schlage Sense Smart Deadbolt and your home network, allowing remote access. While not required, the WiFi adapter is also your connection to a number of compatible home automation systems

Programmable access codes contain 4 digits. No more worrying about managing your keys or even losing them altogether. Pair with your phone over Bluetooth for access in the palm of your hand. And program up to 30 codes to give easy access to your family.

How To Install Schlage Sense Smart Deadbolt

 

Schlage Sense Smart Deadbolt Battery Replacement

 

How To Rekey Schlage Sense Smart Deadbolt

The Schlage Smart Deadbolt with Century Trim in Satin Nickel makes daily life easier and more convenient. Enter an access code on the touchscreen to unlock the door instead of searching your pockets for keys. Pair the lock with your smartphone over Bluetooth.. Share access with trusted friends and family with just a few taps in the Schlage Sense app no more keeping track of spare keys. The Schlage Sense lock is easy to install yourself in minutes. It’s battery operated so there’s no hardwiring required, and the lock will still accept access codes if the power goes out at home. You can update the lock wirelessly through the app as new features are released, which means you never have to buy a new lock to take advantage of the latest capabilities. Add the Schlage Sense Wi-Fi Adapter (sold separately) to your home Wi-Fi network to lock/unlock from anywhere on Android smartphones, iPhone., iPad. or iPod touch.. Or, if you have an iPad./Apple TV. connected to your home Wi-Fi network, you can control the lock from your iPhone as part of your HomeKit-enabled smart home.

 

 

 

 

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of locksmith experience and a BA (Honors) in Criminology from Simon Fraser University.

Schlage-Sense-Deadbolt-Review-Maple-Ridge

Schlage Sense Deadbolt Review Maple Ridge

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of locksmith experience and a BA (Honors) in Criminology from Simon Fraser University.

Mr. Locksmith Maple Ridge: (604) 259-7616

How to Take a Copy of a Key | Mr Locksmith Maple Ridge

How To Take A Copy Of A Key | Mr Locksmith Maple Ridge

Call Mr. Locksmith Maple Ridge: (604) 259-7616

https://mrlocksmithmapleridge.com/

Sending a locksmith the picture of a key can help us identify the key or lock. This may seem like a silly video, but it’s actually very important. I made the “How to Take a Picture of a Key” to help our customers.

  1. Take an in-focus picture of the key.
  2. Take a picture of both sides of the key.
  3. Remove any tape or obstruction covering the head of the key.
  4. If possible a picture of the end of the key.
  5. In-focus pictures of the key.

Key Copy Near Me

A lot of times customers ask Where can I get a “key copy near me’”  “I need my locks rekeyed.” or “Duplicate Key” and then they try to describe it to me. Sometimes they can, sometimes they can’t, sometimes there’s no information that you can see, but I can see. So, a lot of times we ask our customers “Take a picture, take an in-focus picture of the key.” So we ask our customers, email or just text me, a picture of your key. So this is how to take a picture of your key so I can see what you have. You gotta take both sides of the key. So take a picture there, so I can see what the make is, I can look at some of the grooves and then turn the key over and take a picture again, and then I can see from the other side I know it’s a Schlage, and on this I can see it’s a C123. So I can tell you “Yes I have that key.” So whatever key you have, whether it’s a car key, or house key, motorcycle, whatever, in focus, both sides of the key, then you can email it to me or a locksmith and we can tell you if we have that key.

Email: [email protected]

How-to-take-a-picture-of-a-key-C123-Maple-Ridge

How to take a picture of a key C123 Maple Ridge

How-to-take-a-picture-of-a-Schlage-Maple-Ridge

How to take a picture of a Schlage Key Maple Ridge

How-to-a-picture-of-a-Kwikset-Maple-Ridge

How to take a picture of a Kwikset Key Maple Ridge

How-to-take-a-picture-of-a-key-Weiser-Maple-Ridge

How to take a picture of a Weiser Key Maple Ridge

Sometimes we’ve had people on fishing expeditions up north, they’ve taken their keys with them they’re in the middle up north, in the middle of nowhere, the wife is locked out, they have the key, and this one, we can actually see this one has a code, so we now know we can cut that by code and we can get that person in the house really quick and easy.

In conclusion, silly as it sounds “how to take a picture of a key”, in focus, both sides of the key, text or email, then we can tell you what you have. [email protected]

How-to-take-a-picture-of-a-key-Mr-Locksmith

How to take a picture of a key Mr. Locksmith

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

Amazon’s Ring video doorbells catch fire! Can’t Fix Stupid | Maple Ridge

Amazon’s Ring video doorbells catch fire! Can’t Fix Stupid | Maple Ridge

Call Mr. Locksmith Maple Ridge: (604) 259-7616

Ring Video Doorbell Fire, Ring and Nest are the two major video doorbell products. Ring Video Doorbell has sold approximately 8,700 units in Canada.

For further information go to https://mrlocksmithmapleridge.com/

I have tried them both and they do what they say they are going to do. But what’s interesting, this is the Ring notice on it. But there’s been this doorbell 2nd generation tool has been linked to numerous fires throughout the US and Canada. I don’t know about Canada so much, but I know in the U S. Now Ring has not done a recall on this. They have sent out a notice, and we’ll put the link here on the video saying what the problem is. And it’s an interesting problem. So again, this is not really Ring’s problem. What is happening, and I’ll pull this apart here, is people are, it has a little battery pack and you can chargeable batteries or replace them or whatever. But there’s a machine screw that covers the battery pack. Well, what people who have been purchasing this have been doing, instead of the machine screw, they’re taking the longer wood screw screwing it into the housing, and it goes into the batteries and that’s what’s causing the short or the heating and is causing the fires. They have not done a product recall (update Ring has just announced a recall), and I can understand. You can’t fix stupid. The people are going to you know if you have a machine screw and they throw a wood screw in there is that really their fault that customers are stupid. However, we call it regression towards the mean somebody you’ve got to design stuff so stupid people can’t hurt themselves. So I grabbed this Ring video doorbell that is has a battery pack. And this is generation two which they say is the problem.

Let’s see what we got. Never unboxed this one, this is brand new. So there is the Ring. For simple, easy to do, this one is not expensive. I think they’re blowing them out the door cheap right now. It’s not an expensive doorbell. It’s like 100, $150, but it’s, again, it’s not a recall. They’re just saying, and I always loved they come with a nice little kit here, a little, you know it’s got everything in here to install it quite easily. And this is the one for people who don’t have. You have the battery pack because you don’t have the doorbell wires leading to your doorbell. So this is really good with the battery pack for people who don’t have the wired system to the front door. Here is the little machine screws. So there’s one little tiny machine screw, these three other screws.

Ring-Video-Door-Bell-Fire-Screws-Maple-Ridge

Ring Video Door Bell Screws Maple Ridge

Ring-Video-Doorbell-Fire-Maple-Ridge

Ring Video Doorbell can catch fire if wooden screws are used instead of machine screws Maple Ridge

Ring Video Doorbell Fire

It’s well packaged, Well, you know, well-designed like under $150, I think they’re on sale even less. Let’s warn everybody we have a video. The secret to these things really is they want you on the monthly plan. You can’t blame them for that. They wanna make money. This is a good little kit. Oh, even a little level. Oh my goodness, they got a little bit of everything in here. When you install this, with the wired system or the unwired, there are two areas they can make a mistake on. What’s happening is there, people are taking the woodscrew and there’s when they put this on the door, instead of, this is how you slow people down from stealing it. You put in the little screws on the bottom. So there are two little machine screws, go on the bottom. If you put in the two screws, it slows them down. They have to have a Torx, a small Torx. There are two little Torx screws that go in the bottom. Now what’s happening is people are either losing these because when you try, you’re trying to install this upside down and backward, you know, upside down on your door and you’re gonna lose these little screws. Yeah, it’s just a fact of life. You gotta drop them. People are dropping them, losing them. And whether they’re doing is taking the longer screw putting it into the bottom. And they’re tightening that screw all the way into the battery pack. So it’s not really Ring’s fault. So that’s why it’s, there’s a warning out to the public from Ring on this problem. And this is basically, is just basically people who don’t know the difference between a machine screw and a wood screw and people being stupid and forcing this thing. You really got to crank this to go in there and destroy that lock or destroy the battery pack. It’s a good product. I like their products, they’re good. It’s not a, it’s not a Ring problem.

I hope you enjoyed watching this Ring Video Doorbell Fire video. Subscribe to my channel, also visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Ring recalls 350,000 smart doorbells after some of them caught fire

The potential fire hazard impacts around 350,000 2nd generation Ring doorbells sold in the United States and roughly 8,700 more sold in Canada, according to a notice posted by the US Consumer Product Safety Commission (CPSC) on Tuesday. The $100 doorbells were sold on Ring’s website and on Amazon (AMZN) between June 2020 and October 2020, according to the CPSC.
“The video doorbell’s battery can overheat when the incorrect screws are used for installation, posing fire and burn hazards,” the notice said.
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.
Mr. Locksmith™ Locksmith Courses: http://mrlocksmithtraining.com/ 4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/ How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/ How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/ How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/ Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/ ONLINE AUTOMOTIVE LOCKSMITH COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/ Business email: [email protected] Fan mail/products to be reviewed can be sent to: Mr. Locksmith 1685 H Street Blaine, Washington 98230
Ring-Video-Door-Bell-Fire-Mr-Locksmith-Maple-Ridge

Ring Video Door Bell Fire Mr. Locksmith Maple Ridge