Archives for February 2022

My Lock Picks | Mr. Locksmith™ Maple Ridge

My Lock Picks: Hi, I’m Terry, and I get asked many times, what do I use for picks.

My Lock Picks

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

Lock Pick Case

When I show up at a job site, I pull this out of my locksmith tools and it’s just a little map expedition case, this is a EDC case. And in it, and this is what I do probably 95% of my picking lockouts, is just, I grab this kit, it’s quick and easy.

Knipex Cobra XS 4″ Plier

And just inside is, I’ll show you what I got here. I have my latest little toy. I have my KNIPEX pliers, and these are handy and they’re narrow enough, sometimes I can get a broken key out of there, but this is for picking. I just grab this. I can have this, if I have to turn it.

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

Lock Picks

The main tools I use, every single time. So my favorite pick is a hook pick with a diamond. And some of these are Peterson’s, Rytans, whatever. That’s my favorite pick. This one’s a little bit thicker. This one’s a little bit thinner. And I always grab, I prefer a rigid tension wrench, and I also have a flexible one. You see, I bent it. I bend this whichever way I’m going. So these three things right here I’d say open up 90, 95% of the lockouts I have if I have to pick the lock.

Plug Spinner

This is it, very simple. I either use a rigid, a flexible, and a lot of times the locks will pick the wrong way. Well, I’m not gonna re-pick it. I’m gonna use my plug spinner. I call it a flipper, a plug spinner. I have a whole different types of spinners, but this is the one in my case. I have a bigger pick set that I use if I just not picking it.

WD40

And of course I always have a little can of WD-40 I use for picking locks, not for lubricating locks, for helping me to pick it. My friends all use TriFlow and I like using WD-40. I had a lock the other day, it was funny. It was a lockout and it was a Schlage deadbolt, and they can be difficult to pick. And I was having no luck picking it at all. And then I just gave it a little spray of WD-40 and it picked like in 10 seconds. Lubricant is extremely important for picking locks. I always try to pick a lock without using lubricant, and then if I can’t pick it, then I’ll spray it. Some guys will spray it with the lubricant right off the bat, some locksmiths will just spray it right off the bat. I’ve had extreme luck. Sometimes you go there, the lock is just ready to pick, so by the time I apply tension, put the pick in, and it opens. People ask about the technique.

Sticky Lock Maple Ridge

Sticky Lock Maple Ridge

 

Single Pin Picking

I’ll show you in a couple of videos coming up, but there’s two techniques. There’s the single-pick method, which is the best method, and then there’s raking, which works well. What I do is, I rake the lock, apply tension, I rake the lock a few times and then I’ll single-pin pick it. That seems to work really good for me. Also, don’t be afraid to release tension. I’ll rake it, single-pin pick it, and then I’ll let go. And if I don’t hear click, click, click, it means I haven’t applied proper tension. So one way, instead of just picking away, some people are afraid to release tension, release the tension, then you can see, “Oh, I picked a bunch.” Or if you hear nothing, you don’t hear the pins falling back in, then you know you got bad tension. But back to the point, this is my everyday carry. If I show up a lockout, this is what I have in my kit. Hope you enjoyed the video. Please like and subscribe and stay tuned for more videos coming up. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

My Lock Picks: If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Maple Ridge can help you. Call Emergency Locksmith Maple Ridge British Columbia.

Mr. Locksmith™

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

 

My Lock Picks Mr. Locksmith Maple Ridge

My Lock Picks Mr. Locksmith Maple Ridge


Knipex Pliers for the Locksmith | Mr. Locksmith™ Maple Ridge

Knipex Pliers for the LocksmithKNIPEX pliers stand for quality made in Germany. Worldwide leading pliers manufacturer for professional users in trade and industry.

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

Knipex Cobra XS 4 inch Piler

You hear the expression, especially when it comes to tools, “Cry once when you buy it or cry twice when you have to replace it.” You buy quality tools, you really save yourself a lot of time and money over the long haul. Same thing with key machines. I’ve got key machines that are 35 years old. They work absolutely perfect. They work some better than some of the new ones. That’s another story. But a couple of years ago, I bought the Knipex bolt cutters for cutting screws and tail pieces on locks. And because of that, I’ve now purchased, I’ve gone into the little tiny, probably the most expensive pliers I ever bought, the Knipex a pliers.

Knipex Pliers

This is in my pick kit, my EDC. I’ve replaced my crescent wrench with this little Knipex. With pliers, it’s basically replaced my crescent wrench. I’ll never go back to a crescent wrench. I’m actually now looking at the larger one, I still use a large crescent wrench for when I install with my pit ball, which is another video, when I’m installing latches on steel doors. So I’m gonna get the bigger set and that’ll be the next thing to add And these two tools, I call them channel locks, but they’re actually called water pump locks.

If I got to grab something, these are unbelievable. So this is in my tool case for every day. This is in my backup kit for when I have to do something a little bit more heavy duty. The power of these and the gripping power is unbelievable. I was in the rain the other day and some of my other tools that were getting rusty, my fault, I should have oiled them down. These things still look brand new. I’ve had excellent luck with these.

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

So I’m extremely happy with my Knipex pliers. Very, very happy. I’m gonna add a few more and you’ll be seeing them in future videos as I’m doing jobs. So these are the very best pliers you can buy. If you look at the Mack Trucks, I think even Snap-On, they’re carrying the nitpicks line in there. I don’t know if they’ve rebranded them, but you can buy these at your, they’re a little bit harder to find at your big box hardware stores ’cause they’re trying to flog their in-house brands. The advantage of buying off of a, I call it the big box trucks, is if something breaks, it’s very easy to do a replacement.

I haven’t had to replace the thing yet, but it’s extremely easy with other Snap-On tools I have, especially my circuit pliers. I tend to break them every couple of years. They just give me a new one. I have some screwdrivers and some Snap-On ratchets and whatnot. If I crack them, they replace them instantly. So I love my Snap-On truck guy and I love the Mack tools guy. That’s the two I like. The tools are good and a lot of them are selling these lines. So it’s just to go in and get a replacement.

Mr. Locksmith™ Maple Ridge

This is the second most little tool I’ve ever bought. It’s a Knipex pliers, it was under $50. Look at the size of this, it’s tiny. It’s extremely strong from what I’ve seen. I bought these for my pick case. I’ll have some stuff showing my little tools that I use for broken keys and whatnot. This is just gonna come in handy for grabbing little bits and pieces. It’s overpriced, yeah, I wanted one and I’ll show you how I put it in my, in my pick case.

 

If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Maple Ridge can help you. Call Emergency Locksmith Maple Ridge British Columbia.

Mr. Locksmith Maple Ridge: (604) 259-7616

Mr. Locksmith Automotive Maple Ridge(604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

Knipex Pliers for the Locksmith

Knipex Pliers for the Locksmith


Mr. Locksmith™ YouTube Membership Channel

Mr Locksmith YouTube Membership Channel:

Mr Locksmith Membership Channel | Mr. Locksmith™

JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKS:

https://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join

Note: Videos are just being uploaded now. Lots of new content hourly and daily.

I am very excited to announce I have decided to have a YouTube membership site. So on our Locksmith channel here, I am going to put more detailed information that I do not generally put for the general public. There will be different bypass methods, I don’t publicly put up on the public channel. There will be drilling techniques. Also, the exact spots to drill, safes, and the locks, to quickly open them.

Price is $5 to $100 per month I am going to have a lot of videos that will not be on the public Channel. There will be more in-depth on a lot of our videos. Furthermore, I will have an Automotive Locksmith Members area, locksmithing Members area, Locksmith Course / Training Members. Platinum Members area covering the Locksmith Business, The Locksmith Business videos I like to do more in-depth information.

Also, I will have a Members Level of safe videos on where to drill them in different bypass methods. The Car Locksmith Members level is going to be really exciting! Many of these videos will not be on the Public YouTube channel. They will be only on the Membership Channel. I will post a lot of videos that would eventually will go onto the public site but the videos will be posted to the Membership Channel first. I am looking forward to the new Membership Channel and it will be lots of fun.

Mr. Locksmith™

Terry Whin-Yates

email: [email protected]

Locksmith Courses: http://mrlocksmithtraining.com/

 

#mrlocksmith #locksmithtraining #mrlocksmithmembership

Mr Locksmith Membership Channel

Mr Locksmith Membership Channel

Youtube Locksmith, Mr. Locksmith YouTube Locksmith, Terry Whin-Yates, Locksmith Training videos, Locksmith training Kit, Locksmith training online, locksmith training Canada, locksmith training USA, What is the best locksmith training course, How to Become a Locksmith,