Archives for March 2021

How to Remove Lori Double Cylinder Deadbolt | Mr. Locksmith Maple Ridge

How To Remove Lori Double Cylinder Deadbolt | Mr. Locksmith™ Maple Ridge

How to Remove a Lori Double Cylinder Deadbolt: Lori Deadbolt locks can be confusing to remove for experienced and new locksmiths too. You will need a 5/64 -inch long-shaft Allen wrench to remove the Mortice Cylinders from the lock housing. Lori deadbolts, manufactured by Ilco Industries and use mortised deadbolts available in both thumb turn and double cylinder models. Removing the Lori deadbolt to re-key or replace the lock not difficult if you have the proper Allen Wrench.

Mr. Locksmith Maple Ridge: (604) 259-7616

Automotive Locksmith Coquitlam : (604) 259-7617

How to Remove a Lori Double Cylinder Deadbolt

  • Open the door.
  • Remove the deadbolt faceplate from the door edge by removing the two flathead screws using a Phillips screwdriver.
  • Remove the thumb latch assembly from the interior side of the door, if applicable, by removing the two screw bolts on either side of the latch handle, then pulling the assembly horizontally from the door.
  • Insert the long shaft of a 5/64-inch Allen wrench into the space on either side of the slide bolt to engage in the cylinder set screws and turn the set screw counterclockwise two to three full turns to loosen. Repeat for the set screw on the other side of the slide bolt if it is a double cylinder deadbolt.
  • Remove the deadbolt cylinder(s) by turning the cylinders counterclockwise until the cylinder is free of the mortise housing. Insert the deadbolt’s key halfway into the cylinder for leverage in turning the cylinder. Repeat for the opposite side cylinder in double-keyed models
  • Remove the slide bolt assembly from the door edge, then remove the cylinder housing from the door hole.
Lori-Double-Cylinder-Deadbolt-maple-ridge

Lori Double Cylinder Deadbolt | Mr. Locksmith Maple Ridge

Lori-Double-Cylinder-Deadbolt-maple-ridge

Lori Double Cylinder Deadbolt | Mr. Locksmith Maple Ridge

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

 

Mr. Locksmith Maple Ridge: (604) 259-7616

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Is it Cheaper to Rekey or Replace Locks? | Mr. Locksmith™ Maple Ridge

Is it Cheaper to Rekey or Replace Locks? | Mr Locksmith Maple Ridge

https://mrlocksmithmapleridge.com/

Mr. Locksmith Maple Ridge: (604) 259-7616

Cheaper to Rekey or Replace Locks

Whether you just moved into a new home or have been in the same house for a while, it might be a good time for you to look into changing your locks.

Every day I get asked should I rekey my locks or replace them? Re-keying your locks, if you have good locks, it’s pretty inexpensive. We just re-key the lock so the old key doesn’t fit it. So we take the lock off, re-key it, put it in, give you brand new keys. The old key will go in the lock but it won’t turn the lock. That’s re-keying. So re-keying is usually less expensive. So most locks can be re-keyed. Residential, business, commercial, everything. Most locks can be re-keyed. Residential and commercial locks The deadbolts and the key in knobs. We can re-key them. We can change the combination inside and give you new keys. If you have a good lock and it’s less expensive than replacing them. However, if you have some old, crappy locks or inexpensive or you want to increase the security of your locks, then we will replace the lock and sell you a new one and install it.

Rekey Locks

Re-keying is simple. It’s very fast. It doesn’t take long for us to do it. And we can re-key regular locks, high-security locks, some padlocks can be re-keyed but most can’t, they’re sealed units. Re-keying your locks is pretty inexpensive compared to replacing them. Also, it doesn’t take a lot of time, 15 minutes we can re-key a basic lock. Sometimes they take a little bit longer, sometimes quicker. Just depends upon the lock and how old it is and what style of lock it is. Some of the high security locks can take quite a while to re-key. But again, it’s less expensive. You don’t have to change your locks. You don’t have to install brand new ones. We can just re-key your existing locks.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

cheaper-to-rekey-or-replace-lock-maple-ridge

Cheaper to Rekey or Replace Lock?

Mr. Locksmith Maple Ridge: (604) 259-7616

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

cheaper-to-rekey-or-replace-lock-maple-ridge

Cheaper to Rekey or Replace Lock? | Mr. Locksmith Maple Ridge